+karri Posted December 23, 2021 Share Posted December 23, 2021 20 minutes ago, 42bs said: Even if I do not connect the tx line, the adapter drains power from the Lynx. The Rx is an input. I don't get it. It should not pass much current. Quote Link to comment Share on other sites More sharing options...
42bs Posted December 23, 2021 Share Posted December 23, 2021 Is the raspi 5v tolerant? Quote Link to comment Share on other sites More sharing options...
+karri Posted December 23, 2021 Share Posted December 23, 2021 16 minutes ago, 42bs said: Is the raspi 5v tolerant? Nope. But there is some pretty clever logic chips that can handle the logic of the diode as well. And do the voltage conversion. Quote Link to comment Share on other sites More sharing options...
MichelS Posted December 23, 2021 Author Share Posted December 23, 2021 Sorry for replying late - preparing for Christmas... No replacement screens in my Lynxes. I do have a Benn Venn, but never got to install it. Also no problems with my adapter whatsoever. Power on, power off - sometimes i do this 3-4 times a minute. Power on with comlynx loader cart inside, compile (makefile sends compiled file automatically), test, switch off and repeat. Quote Link to comment Share on other sites More sharing options...
42bs Posted December 24, 2021 Share Posted December 24, 2021 10 hours ago, MichelS said: Sorry for replying late - preparing for Christmas... No replacement screens in my Lynxes. I do have a Benn Venn, but never got to install it. Also no problems with my adapter whatsoever. Power on, power off - sometimes i do this 3-4 times a minute. Power on with comlynx loader cart inside, compile (makefile sends compiled file automatically), test, switch off and repeat. Here also, preparing for Xmas, that's why the Lynx was 2h unintended. So maybe the old screen drains enough power to allow a real power off (it is a soft power off anyway). BTW: If you connect TP1 via button to GND => RESET (quicker as power off/on and maybe healthier). Quote Link to comment Share on other sites More sharing options...
sage Posted December 24, 2021 Share Posted December 24, 2021 2 hours ago, 42bs said: TP1 via button to GND => RESET (quicker as power off/on and maybe healthier). good idea with the mcwill mod, I noticed a glitch for games which have a very fast boot process, that the buttons are not read correctly. i guess this is also an effect of different power consumption and behaviour 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.