tschak909 Posted January 6, 2022 Share Posted January 6, 2022 @jeffpiep successfully booted Total Replay v4 from a DigitalOcean server using the prototype #Apple2 #FujiNet which is connected to the #Apple2 plus via SmartPort! Yes, this is an Apple2 being booted from the internet. 4 Quote Link to comment Share on other sites More sharing options...
tuf Posted January 6, 2022 Share Posted January 6, 2022 (edited) How absolutely cool is this? PS: Make sure it supports the GS Edited January 6, 2022 by tuf 1 Quote Link to comment Share on other sites More sharing options...
ajacocks Posted January 6, 2022 Share Posted January 6, 2022 Sounds like great progress. - Alex Quote Link to comment Share on other sites More sharing options...
potatohead Posted January 8, 2022 Share Posted January 8, 2022 So cool! Soon, we will have people playing cross platform 8 bit games over the Internet! Quote Link to comment Share on other sites More sharing options...
tschak909 Posted January 8, 2022 Author Share Posted January 8, 2022 Yes -Thom Quote Link to comment Share on other sites More sharing options...
macsonny Posted September 29, 2022 Share Posted September 29, 2022 Anyone know the status of this activity? I'm interested in purchasing a unit but there seems to be little information about anyone selling? Quote Link to comment Share on other sites More sharing options...
tschak909 Posted September 30, 2022 Author Share Posted September 30, 2022 8 hours ago, macsonny said: Anyone know the status of this activity? I'm interested in purchasing a unit but there seems to be little information about anyone selling? If you're not familiar with FujiNet, it is completely developed in the open, and sold via vendors in the given community. Even though there aren't units being sold yet, there is considerable development happening. If you want to help out, join the FujiNet Discord! https://discord.gg/7MfFTvD -Thom Quote Link to comment Share on other sites More sharing options...
masteries Posted September 30, 2022 Share Posted September 30, 2022 (edited) 15 hours ago, macsonny said: Anyone know the status of this activity? I'm interested in purchasing a unit but there seems to be little information about anyone selling? I received an Apple2c and an Apple2gs Next week my first manufactured batch of FujiApple will be ready Edited September 30, 2022 by masteries Quote Link to comment Share on other sites More sharing options...
macsonny Posted September 30, 2022 Share Posted September 30, 2022 16 minutes ago, masteries said: I received an Apple2c and an Apple2gs Next week my first manufactured batch of FujiApple will be ready How can I purchase one? Quote Link to comment Share on other sites More sharing options...
mozzwald Posted September 30, 2022 Share Posted September 30, 2022 20 hours ago, macsonny said: Anyone know the status of this activity? I'm interested in purchasing a unit but there seems to be little information about anyone selling? I have a couple left at https://fujinet.online/shop/appleii/fujiapple-rev-0/ 5 hours ago, masteries said: Next week my first manufactured batch of FujiApple will be ready New design or the Rev 0 board? Quote Link to comment Share on other sites More sharing options...
masteries Posted September 30, 2022 Share Posted September 30, 2022 3 minutes ago, mozzwald said: New design or the Rev 0 board? New design; simplified, much smaller (45x45 mm size), embedded DB19 connector. 1 Quote Link to comment Share on other sites More sharing options...
mozzwald Posted September 30, 2022 Share Posted September 30, 2022 48 minutes ago, masteries said: New design; simplified, much smaller (45x45 mm size), embedded DB19 connector. Nice! Cant wait to see it Quote Link to comment Share on other sites More sharing options...
masteries Posted October 3, 2022 Share Posted October 3, 2022 On 9/30/2022 at 7:12 PM, mozzwald said: Nice! Cant wait to see it Here you can enjoy them: 2 Quote Link to comment Share on other sites More sharing options...
Solitaire01 Posted November 6, 2022 Share Posted November 6, 2022 On 9/30/2022 at 11:19 AM, mozzwald said: I have a couple left at https://fujinet.online/shop/appleii/fujiapple-rev-0/ New design or the Rev 0 board? Any idea when more may be available? Quote Link to comment Share on other sites More sharing options...
tschak909 Posted November 6, 2022 Author Share Posted November 6, 2022 @mozzwald makes these, as he can. We are still firming up the firmware, so other than @masteries version, no vendors are making them yet. -Thom 1 Quote Link to comment Share on other sites More sharing options...
masteries Posted November 7, 2022 Share Posted November 7, 2022 Thanks tschak909, Currently I have units in stock, many of them are prepared for their journey to USA 1 Quote Link to comment Share on other sites More sharing options...
Solitaire01 Posted November 7, 2022 Share Posted November 7, 2022 2 hours ago, masteries said: Currently I have units in stock, many of them are prepared for their journey to USA I’d certainly be interested in one if/when available! Quote Link to comment Share on other sites More sharing options...
masteries Posted November 7, 2022 Share Posted November 7, 2022 2 hours ago, Solitaire01 said: I’d certainly be interested in one if/when available! There is a new batch under manufacturing, You have a message, Thanks! Quote Link to comment Share on other sites More sharing options...
masteries Posted December 11, 2022 Share Posted December 11, 2022 (edited) @tschak909 @mozzwald Something rare found by some users at their Apple IIc , solution comes from a french user: Original message: Hello Je suis parvenu à utiliser votre matériel Mais en cherchant beaucoup. En fait sur mon IIc pour lancer un programme depuis internet , je dois taper « esc » et en même temps « ctrl + pomme + reset » D’où « esc » seul ne lance pas de boot ------------------------------------------------ Translation Hello I managed to use your material But looking for a lot. In fact on my IIc to launch a program from the internet, I have to type "esc" and at the same time "ctrl + apple + reset" Hence "esc" alone does not launch boot It also happens in american Apple IIc, not all, but some of them. Hopefully, solution is easy Edited December 11, 2022 by masteries Quote Link to comment Share on other sites More sharing options...
tschak909 Posted December 11, 2022 Author Share Posted December 11, 2022 2 minutes ago, masteries said: @tschak909 @mozzwald Something rare found by some users at their Apple IIc , solution comes from a french user: Original message: Hello Je suis parvenu à utiliser votre matériel Mais en cherchant beaucoup. En fait sur mon IIc pour lancer un programme depuis internet , je dois taper « esc » et en même temps « ctrl + pomme + reset » D’où « esc » seul ne lance pas de boot ------------------------------------------------ Translation Hello I managed to use your material But looking for a lot. In fact on my IIc to launch a program from the internet, I have to type "esc" and at the same time "ctrl + apple + reset" Hence "esc" alone does not launch boot It also happens in american Apple IIc, not all, but some of them. Hopefully, solution is easy Please use the latest code, as we've merged a totally new way to communicate with the smartport. -Thom 1 Quote Link to comment Share on other sites More sharing options...
masteries Posted December 11, 2022 Share Posted December 11, 2022 1 minute ago, tschak909 said: Please use the latest code, as we've merged a totally new way to communicate with the smartport. -Thom I´ll report the affected users, Thanks! Quote Link to comment Share on other sites More sharing options...
tschak909 Posted December 11, 2022 Author Share Posted December 11, 2022 Just now, masteries said: I´ll report the affected users, Thanks! It must be pointed out, that we haven't officially released the first version of the production firmware, so anyone who wants to help really needs to follow the instructions here to set up an environment to flash the latest firmware, and report debug messages: https://github.com/FujiNetWIFI/fujinet-platformio/wiki/Board-Bring-Up-Software Quote Link to comment Share on other sites More sharing options...
potatohead Posted December 13, 2022 Share Posted December 13, 2022 On 11/7/2022 at 2:56 AM, masteries said: Thanks tschak909, Currently I have units in stock, many of them are prepared for their journey to USA I am interested as well. Platinum NTSC machine. Quote Link to comment Share on other sites More sharing options...
Solitaire01 Posted December 13, 2022 Share Posted December 13, 2022 Just received my board and am very happy to start testing. Updated to latest firmware after it was hanging scanning my wifi network. Now it no longer hangs, but it finds multiple identical 2.4ghz ssids for which my network only has one, and then doesn't register my password. After saying Connecting to Network it goes back to Scanning. Hidden SSID does nothing when selected. Is there a way to manually enter network info, possibly over a serial connection? Quote Link to comment Share on other sites More sharing options...
masteries Posted December 13, 2022 Share Posted December 13, 2022 (edited) 8 hours ago, Solitaire01 said: Just received my board and am very happy to start testing. Updated to latest firmware after it was hanging scanning my wifi network. Now it no longer hangs, but it finds multiple identical 2.4ghz ssids for which my network only has one, and then doesn't register my password. After saying Connecting to Network it goes back to Scanning. Hidden SSID does nothing when selected. Is there a way to manually enter network info, possibly over a serial connection? In my FAT32 micro SD card, shared for all Fujinet versions, the WiFi information is stored in a file called "fnconfig.ini" [WiFi] enabled=1 SSID= passphrase= Can your network router create multiple instances of the same SSID, one per available channel? (Is this possible?) As well, some routers create multiple instances with the same name, one per each available frequency, such 2.4 GHz and 5 GHz or mixed 2.4 GHz - 5 GHz, these last ones are not suitable for ESP32 Personally, I found problems when there are several dozens of 2.4 GHz SSID, this is not rare, when there are 80+ 2.4 GHz networks, none of them barely works ok xD Edited December 13, 2022 by masteries Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.