Jump to content
santosp

OSS 5 in 1 Remake

Recommended Posts

Hello to all,

Once again and for a limited pieces, the 5 in 1 OSS is available to anyone interested member.

This time the construction was designed and placed inside the new cartridge from Sikor. 🤝

I dare say an excellent copy of Atari XEGS cartridge! 👌

 

This version includes two buttons in the upper side of cartridge, so you can select programs up and down, faster.

The seven segment display is located inside the transparent shell and it is perfectly visible.

The eeprom has placed on a ic socket so one can easily change it.

 

A new feature that I have added to this version, is the use of the 3 extra places of the eeprom from the user. So if anyone want this, they can inform me so that I can leave the menu free to count to "8", and write for him there three 16KB games of his choice.

 

Also in its final form it will include a colorful sticker. What is shown in the photo is a preview to show how the product will be in final stage.

 

The cost of each is 40 euro plus shipping. Feel free to send me a message if someone interested. 🙂

 

 

01.jpg

02.jpg

03.jpg

04.jpg

05.jpg

06.jpg

07.jpg

08.jpg

09.jpg

  • Like 4

Share this post


Link to post
Share on other sites

Hi Panos, I am interested

 

and i would like to add to the 3 more software to extra 16banks, Altirra Basic, Synasoft Assembler, and Assembler Editor

 

Nir

 

Edited by ndary
  • Like 1

Share this post


Link to post
Share on other sites

@ndary

 

Hi Nir,

These 3 extra software follows the standard 16K logic of Atari Cartridges?

Edited by santosp

Share this post


Link to post
Share on other sites

Hello. I am interested as well. If you are able I would like the same configuration as Nir requested. 

 

“I would like to add to the 3 more software to extra 16banks, Altirra Basic, Synasoft Assembler, and Assembler Editor.”

 

Thanks, Eric

Edited by nikolaisen

Share this post


Link to post
Share on other sites

I'm interested. And please leave room for 8.   I will decide on those 3 extra option choices later.  Perhaps the same as Nir if those will work.

 

Eric

Share this post


Link to post
Share on other sites
5 hours ago, David_P said:

I have one of the 2013 edition - highly recommended.

Same - great cart.

  • Like 3

Share this post


Link to post
Share on other sites

Hello, I am also interested. I would like to add the following: Atari Logo, Altirra Basic and Microsoft Basic.

 

Thanks, Claudio

Share this post


Link to post
Share on other sites

Question:  If it requires power on to select which cartridge using the buttons and LED numerical display, how do you change selection with the power already on.  I mean the computer is already booted.  Are you hot swapping from one to the other with computer up?  Does it force a hard reset to switch from MAC/65 to Action! ?

 

Share this post


Link to post
Share on other sites
3 minutes ago, ACML said:

Question:  If it requires power on to select which cartridge using the buttons and LED numerical display, how do you change selection with the power already on.  I mean the computer is already booted.  Are you hot swapping from one to the other with computer up?  Does it force a hard reset to switch from MAC/65 to Action! ?

 

With computer on you can do your selection and after to press the soft reset on your Atari. Computer in reality do a hard reset and your software is load there. 

 

There is also an option where the cartridge remains inactive even though it is connected to the atari cartridge port. In fact the cartridge starts with this option (off) every time you did power cycle your Atari.

Edited by santosp

Share this post


Link to post
Share on other sites
20 hours ago, santosp said:

@ndary

 

Hi Nir,

These 3 extra software follows the standard 16K logic of Atari Cartridges?

Hi @santosp i will you the Roms

Share this post


Link to post
Share on other sites
1 hour ago, santosp said:

With computer on you can do your selection and after to press the soft reset on your Atari. Computer in reality do a hard reset and your software is load there. 

 

There is also an option where the cartridge remains inactive even though it is connected to the atari cartridge port. In fact the cartridge starts with this option (off) every time you did power cycle your Atari.

@santosp if the cartridge starts as off after power cycle, can you software control the selection? 

Share this post


Link to post
Share on other sites

@ndary

1. Thank you.

 

2. What you mean "software"? You will need to use one of the two buttons in the upper side of the cartridge, to count the seven segment display up or down. Afterward  you must press the reset button on your Atari.

Share this post


Link to post
Share on other sites

Hi Panos,

1 please with all 8 slots

can i add my own 16k roms by re-flashing the EPROM with them added on the end or is the process more sophisticated?

cheers

Share this post


Link to post
Share on other sites

@xrbrevin

No isn't sophisticated, but I must to know if you wish to use only simple 16k software or the special one from OSS, as to prepare the firmware. As is now it can handle the software as follows.

1 to 5 places as OSS tolls. 6 to 8 places as simple 16 KB software - games.

So I mean that if you want to burn this with full 8 * 16k programs, it wont work as it is now .

Share this post


Link to post
Share on other sites

With the extra slots in this revision of the cart could the much desired 7-in-1 be made?

 

 

Share this post


Link to post
Share on other sites

People are asking for software that is too big.  It has to be 16k or less.

Share this post


Link to post
Share on other sites
3 hours ago, Mr Robot said:

With the extra slots in this revision of the cart could the much desired 7-in-1 be made?

Yes is possible to add there everything, as long as the file is up to 16k and in cartridge form.

Share this post


Link to post
Share on other sites

Ok, I may have been mistaken about some of the software people were asking for as being too big.  Please disregard.

 

I would also like a cart, and want to add, Synassembler XL, Microsoft Basic II, and Assembler Editor.  All these are on Atarimania and I would like US versions when applicable.  If you need any links or help finding things let me know.  :)

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...