Paul Westphal Posted June 22, 2022 Share Posted June 22, 2022 (edited) Okay guys I have one that's missing the power supply and cables and I'm doing all the research, etc. I DO have the pinouts so I'll have cables made, unless some Atari Angel pops in the thread and has some on hand.. I saw an old thread where Tempest had the same issues and he has been messaged. Anyway if anyone out there has a power brick, can you take a pic of the bottom of it for comparison to another please? Any info is appreciated as My goal is to get her back to original condition, up and running. Making cables is not my thing yet.. it's on my bucket list .. so if anyone wants to make some cables ... Thanks all! Pablo Edited June 22, 2022 by Paul Westphal Quote Link to comment Share on other sites More sharing options...
Paul Westphal Posted June 23, 2022 Author Share Posted June 23, 2022 Update : I contacted Hercules Workshop for the cables. Still looking for some power brick pics/info... Quote Link to comment Share on other sites More sharing options...
+Mitch Posted June 23, 2022 Share Posted June 23, 2022 Did you try asking B&C? They might have all of them. Mitch Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted June 23, 2022 Share Posted June 23, 2022 That's a lot of different voltages going through that connector, but would this plug help you out? I just cut it off to make a PSU for my ST but I don't need this anymore. 1 Quote Link to comment Share on other sites More sharing options...
Paul Westphal Posted June 24, 2022 Author Share Posted June 24, 2022 (edited) Bruce at B&C has the same problems I do, except he has more monitors. Hercules Workshop sent me this link for the power connector : https://www.digikey.ca/en/products/detail/molex/0455590002/3311350?s=N4IgTCBcDaIAwBYCsKCccMQLoF8g But it may not work. The pins don't look spaced equally apart. The four on the left look alike, while the other larger two are the 120v AC lines. : Edited June 24, 2022 by Paul Westphal Quote Link to comment Share on other sites More sharing options...
Paul Westphal Posted June 24, 2022 Author Share Posted June 24, 2022 2 Quote Link to comment Share on other sites More sharing options...
Paul Westphal Posted June 24, 2022 Author Share Posted June 24, 2022 I just measured the pins with a micrometer. They are all the same. 120thou. I will start building the connector with individual molex connectors.. Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted June 24, 2022 Share Posted June 24, 2022 12 hours ago, Paul Westphal said: Bruce at B&C has the same problems I do, except he has more monitors. Hercules Workshop sent me this link for the power connector : https://www.digikey.ca/en/products/detail/molex/0455590002/3311350?s=N4IgTCBcDaIAwBYCsKCccMQLoF8g But it may not work. The pins don't look spaced equally apart. The four on the left look alike, while the other larger two are the 120v AC lines. : Yeah, looking at it closer now I can see that won't work. That's the same connector I sent a picture of. Those pins on the left might fit, but the 2 for 120 do would not. You might have to make one using wire connectors to test. Something like these in the right gauge might work. The 120v look like a bigger gauge. https://www.digikey.ca/en/products/detail/alpha-wire/FCRIMP1-RD076/3718893 Quote Link to comment Share on other sites More sharing options...
Paul Westphal Posted June 24, 2022 Author Share Posted June 24, 2022 The power supply and connector are being R & D'd right now. When that's hammered out I'll post something significant. Quote Link to comment Share on other sites More sharing options...
Paul Westphal Posted June 25, 2022 Author Share Posted June 25, 2022 Bruce (B&C) just texted some power supply info and pics : 1 Quote Link to comment Share on other sites More sharing options...
Muzz73 Posted August 1, 2022 Share Posted August 1, 2022 Man... I have owned two PS3000's and donated both of them to Atari collectors. I wish I could have helped... ? 1 Quote Link to comment Share on other sites More sharing options...
Paul Westphal Posted August 3, 2022 Author Share Posted August 3, 2022 Thanks! The custom A/V cable from Hercules Workshop is in. We are waiting for power supply parts. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.