belty #1 Posted April 4, 2004 I've just picked up a second six switch woody and the vision has a couple of problems, plain background colours look (in the best way I can describe it) similar to the macro blocking of Jpeg compression also moving elements have a slight ghost image to the right of them. I'm guessing it is probably to do with the RF modulator. The RF lead though is pretty long about three times normal length, I've opened the system up and the lead that connects to the RF unit looks like a genuine Atari one at both ends but there again it doesn't seem standard. I am going to swap the leads with another system in case it is RF interference on the lead but I doubt that though. Any ideas? Anyone else had this problem is it likely to be graphical related or RF related? This is a PAL system by the way. Quote Share this post Link to post Share on other sites
Whisper #2 Posted April 4, 2004 The artefacts in the screen happen with all games after about 1985 on all my non-junior PAL machines. I have accepted it as there doesn't seem to be an explaination for it. Put in any older game and it works fine. With the game Fatal Run it's particularly bad. Quote Share this post Link to post Share on other sites
belty #3 Posted April 5, 2004 Hmmm.... Interesting... I'm going to test that theory out, thanks for that. Quote Share this post Link to post Share on other sites
Whisper #4 Posted April 6, 2004 That also includes re-issues of older games. I have a © 1988 black pic label Yar's revenge that has the artefacts and an original 1st edition one that has flawless visuals. The same with my re-issue of River Raid. I think they used different media for the game at a later stage (?). I have not tested it on a 6-switch as I don't own one, but the same sympthoms appear on my woody 4-switch and my 2 Vaders, so I think I can rule coincidence out. And it's not the power supply Thomas I tested it on all machines using the original 9V 500mA power supply. Quote Share this post Link to post Share on other sites
Mister VCS #5 Posted April 6, 2004 I have never had picture-problems with a 6switch. The picture on this consoles is clear. The problems only appear on a 2600A. Quote Share this post Link to post Share on other sites
Thomas Jentzsch #6 Posted April 6, 2004 And it's not the power supply Thomas I tested it on all machines using the original 9V 500mA power supply. Damn! Quote Share this post Link to post Share on other sites
Whisper #7 Posted April 6, 2004 Fatal run also displays those strange artefacts on the 6-switch of a friend of mine, haven't tested other games though. I could give him another red-label cart or re-issue to be sure. Quote Share this post Link to post Share on other sites