sku_u #1 Posted February 6, 2005 Does the O2 use a standard 9V PS? I can't find the one that came with my system. Quote Share this post Link to post Share on other sites
CPUWIZ #2 Posted February 6, 2005 No, it's 11.5VAC / 400mA. Note: AC! Quote Share this post Link to post Share on other sites
sku_u #3 Posted February 6, 2005 Sh*t! I guess I won't be playing the O2 tonight. Quote Share this post Link to post Share on other sites
Bryan #4 Posted February 6, 2005 If it's a round connector, you might try an Atari 9VAC brick. It might be enough voltage to work. -Bry Quote Share this post Link to post Share on other sites
Dr. Morbis #5 Posted February 6, 2005 A NES AC adaptor will work just fine. The connection is a little loose though, but it works. Quote Share this post Link to post Share on other sites
Famicoman #6 Posted February 8, 2005 If it's a round connector, you might try an Atari 9VAC brick. It might be enough voltage to work. -Bry I too have heard that this works. Quote Share this post Link to post Share on other sites
Ze_ro #7 Posted February 9, 2005 I've been using a NES power supply for my Odyssey^2, and have never had a problem. NES power supplies are pretty abundant too, so you shouldn't have any trouble finding one. --Zero Quote Share this post Link to post Share on other sites
Phosphor Dot Fossils #8 Posted February 11, 2005 If you have any of the older Odyssey dedicated consoles - i.e. Odyssey 100-4000 - those AC adaptors will work with the O2 as well. If all else fails, you can usually eBay one of the Odyssey x00/x000 consoles for a couple of bucks. Quote Share this post Link to post Share on other sites