jammajup Posted July 10, 2005 Share Posted July 10, 2005 Hi all Sorry for such an odd question but i have never encounted this before. I have a Super Off Road on the rig at the mo,i have made molex-jamma connections and it powers up but i have seperate pins for Video Hor and Ver sync (Connector P1 pin8/9), so how can i combine these two hor/ver signals to enable comp sync for normal use in cab/test rig etc. Quote Link to comment Share on other sites More sharing options...
chadtower Posted July 11, 2005 Share Posted July 11, 2005 This is not a JAMMA game. Try again. Quote Link to comment Share on other sites More sharing options...
jammajup Posted July 11, 2005 Author Share Posted July 11, 2005 (edited) This is not a JAMMA game. Try again. 889663[/snapback] Thanks for that mr Tower but i did not actually state it was a Jamma game,the fact it is not Jamma is why i need to make Jamma adaptor for it to work in cab /test rig. Anyhow i have just had confirmation from 3 other forums that you can tie Hsync/Vsync wires together from the board to the Jamma adaptor comp sync terminal.This was the first thing i tried but it had no effect which is why i have posted to forums,so the board may have a sync prob. http://forums.webmagic.com/ubbthreads/show...sb=5&o=&fpart=1 Edited July 11, 2005 by jammajup Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.