Ironman Ivan Stewart's Super Off Road

[jammajup]

Hi all

 

Sorry for such an odd question but i have never encounted this before.

 

I have a Super Off Road on the rig at the mo,i have made molex-jamma connections and it powers up but i have seperate pins for Video Hor and Ver sync (Connector P1 pin8/9), so how can i combine these two hor/ver signals to enable comp sync for normal use in cab/test rig etc.

 

[chadtower]

This is not a JAMMA game. Try again.

[jammajup]

This is not a JAMMA game.  Try again.

889663[/snapback]

 

Thanks for that mr Tower but i did not actually state it was a Jamma game,the fact it is not Jamma is why i need to make Jamma adaptor for it to work in cab /test rig.

Anyhow i have just had confirmation from 3 other forums that you can tie Hsync/Vsync wires together from the board to the Jamma adaptor comp sync terminal.This was the first thing i tried but it had no effect which is why i have posted to forums,so the board may have a sync prob.

 

http://forums.webmagic.com/ubbthreads/show...sb=5&o=&fpart=1

Edited July 11, 2005 by jammajup