Any word on Chris Wilkinson's 2600 A/V mod?

[Godzilla]

Just finally get everything in my house to a place where i could play my 2600 again, and its on r/f and looking like pure unfiltered arse, and I was longing for the audio/video goodness I had when using my adam + 2600 module (dont have room to support that monster setup anymore, esp. since it required the adam + printer + 2 vcrs to get a seperate audio out to go with the video,)

 

if not that one, is there some other solution?

 

also like something easy for my inty 2, 7800 & 5200 (I have no solder skillz.)

[CPUWIZ]

Just finally get everything in my house to a place where i could play my 2600 again, and its on r/f and looking like pure unfiltered arse, and I was longing for the audio/video goodness I had when using my adam + 2600 module (dont have room to support that monster setup anymore, esp. since it required the adam + printer + 2 vcrs to get a seperate audio out to go with the video,)

 

if not that one, is there some other solution?

 

also like something easy for my inty 2, 7800 & 5200 (I have no solder skillz.)

 

http://www.8bitdomain.com/

[Godzilla]

dr0000l. KICKASS :-) that covers the 26,52 & 78 :-) now for my inty.... :-) thanks for the info!

[keilbaca]

Just finally get everything in my house to a place where i could play my 2600 again, and its on r/f and looking like pure unfiltered arse, and I was longing for the audio/video goodness I had when using my adam + 2600 module (dont have room to support that monster setup anymore, esp. since it required the adam + printer + 2 vcrs to get a seperate audio out to go with the video,)

 

if not that one, is there some other solution?

 

also like something easy for my inty 2, 7800 & 5200 (I have no solder skillz.)

 

http://www.8bitdomain.com/

 

Hmmmm, I just might have to get this for my atari in the pc project...

[holygrailvideogames.com]

Just finally get everything in my house to a place where i could play my 2600 again, and its on r/f and looking like pure unfiltered arse, and I was longing for the audio/video goodness I had when using my adam + 2600 module (dont have room to support that monster setup anymore, esp. since it required the adam + printer + 2 vcrs to get a seperate audio out to go with the video,)

 

if not that one, is there some other solution?

 

also like something easy for my inty 2, 7800 & 5200 (I have no solder skillz.)

 

http://www.8bitdomain.com/

 

 

8bitdomain is very unreliable. I have to say about the worst service I have ever received on the net or elsewhere. I would take my chances with the devil before dealing with them again. At least with the devil I would know who I was dealing with. I basically was taken for a loss of a lot of money from 8bitdomain.

[+SpiceWare]

Those look nice. I have one of Chris' Cybertech cards and love it - the only thing I didn't care for was soldering those itty bitty wires onto the board.

[holygrailvideogames.com]

I sent you a private message on information of a guy who can mod your Intellivision. He also does Coleco mods. I am not sure about the other systems.

 

You can also try this place. I haven't used them but they have been recommended by other members.

 

http://www.oldschoolgamer.ca/

 

Don't forget about DoubleDown. He does mods as well.

 

http://www.geocities.com/double_down_on_11...VideoGames.html

Edited May 1, 2006 by mcgrail0007

[CPUWIZ]

Just finally get everything in my house to a place where i could play my 2600 again, and its on r/f and looking like pure unfiltered arse, and I was longing for the audio/video goodness I had when using my adam + 2600 module (dont have room to support that monster setup anymore, esp. since it required the adam + printer + 2 vcrs to get a seperate audio out to go with the video,)

 

if not that one, is there some other solution?

 

also like something easy for my inty 2, 7800 & 5200 (I have no solder skillz.)

 

http://www.8bitdomain.com/

 

 

8bitdomain is very unreliable. I have to say about the worst service I have ever received on the net or elsewhere. I would take my chances with the devil before dealing with them again. At least with the devil I would know who I was dealing with. I basically was taken for a loss of a lot of money from 8bitdomain.

 

Yes, they are extemely slow, but Al is trying to work out a deal to sell those products in the AA store.

[holygrailvideogames.com]

Just finally get everything in my house to a place where i could play my 2600 again, and its on r/f and looking like pure unfiltered arse, and I was longing for the audio/video goodness I had when using my adam + 2600 module (dont have room to support that monster setup anymore, esp. since it required the adam + printer + 2 vcrs to get a seperate audio out to go with the video,)

 

if not that one, is there some other solution?

 

also like something easy for my inty 2, 7800 & 5200 (I have no solder skillz.)

 

http://www.8bitdomain.com/

 

 

8bitdomain is very unreliable. I have to say about the worst service I have ever received on the net or elsewhere. I would take my chances with the devil before dealing with them again. At least with the devil I would know who I was dealing with. I basically was taken for a loss of a lot of money from 8bitdomain.

 

Yes, they are extemely slow, but Al is trying to work out a deal to sell those products in the AA store.

 

It isn't just that they are slow. Milke sold me 3 a/v modded systems that I paid $225 for (see below)

 

Dear Sean McGrail,

 

This email confirms that you, stlouisrams2004, have paid [email protected] $225.50 USD using PayPal.

 

This credit card transaction will appear on your bill as "PAYPAL *ESALES".

 

 

--------------------------------------------------------------------------------

 

 

Payment Details

 

 

Purchased From:8bitdomain

 

Item # Item Title Quantity Price Subtotal

8224642325 Enhanced A/V SVideo Colecovision System Console 1 $64.50 USD $64.50 USD

8224642941 Enhanced A/V SVideo Atari 7800 System Console 1 $64.50 USD $64.50 USD

8224643380 Enhanced A/V SVideo Atari 5200 4 Port System Console 1 $64.50 USD $64.50 USD

 

 

Subtotal: $193.50 USD

Shipping & Handling via Standard Delivery to 633XX

(includes any seller handling fees) $22.00 USD

Shipping Insurance(not offered): --

Seller Discounts (-) or Charges (+):

(seller discounts, services, etc.) $10.00 USD

 

Total: $225.50 USD

Note:Hi Mike, I have added $10 for the Colecovision power supply and the additional shipping because of the power supply. Please let me know when this ships and by what carrier. thanks, Sean

 

I paid for these on October 10th last year. He didn't ship them until November 2nd. I never did receive the cables that I paid for for my 5200 mod. The Colecovision and the 5200 system arrived with problems. The Colecovision 2nd controller port didn't work and I had to pay someone else to fix it. My 5200 system still doesn't work. The controller port is broken and the system doesn't keep score correctly. Basically I feel as if he ripped me off. I wouldn't deal with him ever again. For $225 I should have received stuff that worked and it should have shipped sooner.

[+Omegamatrix]

Oh crap. I went to buy one of these as soon as I read the thread. My computer crashed though and I thought I'd just try again later. Now after reading what Sean has said I completely changed my mind. Thanks for the heads up Sean. I hope that Al can get these in as I really would like one.

[+Nathan Strum]

I'm still waiting for an 8bit loaner mod to review on my mod comparison site. But I don't think it's ever going to show up.

[Albert]

I hope that Al can get these in as I really would like one.

That is the plan. I hope to have them soon.

 

..Al