Jump to content
IGNORED

Apple IIc power adaptor needed


AussieAtari

Recommended Posts

Here is the pinout

 

[font=Courier New]
From the Apple //c Technical Reference Manual

Section 11.2.2 The External Power Connector


The external power supply is attached to the internal converter by means
of a 7-pin DIN connector. The connector pins are identified in Figure
11-1 and Table 11-3.


Figure 11-1  External Power Connector
.	 --+ +--	   Pin#	  Signal
.   / 7 |_| 1 \	 Pin 1	 Not Connected
.  | 6	   2 |	Pin 2,3   Signal Ground
.   \ 5  4  3 /	 Pin 4	 Shield Ground
.	\_______/	  Pin 5,6   +15 VDC
.				   Pin 7	 Not Connected

Table 11-3   External Power Connector Signals

Pin#	Name	  Description
1,7	   --	  Not Connected
2,3	 Ground	Common Electrical Ground
4	   Chassis   Chassis Ground
5,6	 +15	   +15-volt DC input to converter 
[/font]

 

I dont remember if its takes both 110/220V, but I know the US power connector is stuck on the brick.

Edited by Almost Rice
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...