Now thru the end of May
I have been on AtariAge for 6 years and have been offering ColecoVision mods for over 5 of those.
To show my thanks for everyones support I am offering $20 off and a free 8 pin mini din to Scart cable to anyone that sends their console for refurbishing and modding. $20 and free cable also applies to consoles I previously serviced.
Regular price for consoles that I have not previously serviced is $129 for refurbish and RGB mod. 8 pin mini din to 8 pin mini din cable for connecting to the Framemeister is included and 8 pin mini din to SCART cable for connecting to the HD Video converter is $20 extra.
$149 now till the end of May $109
Regular price for consoles that I have previously serviced is $99 for RGB mod. 8 pin mini din to 8 pin mini din cable for connecting to the Framemeister is included and 8 pin mini din to SCART cable for connecting to the HD Video converter is $20 extra.
$119 now till the end of May $79
That is like a total of $40 off since most people are going to want to buy the HD video converter for around $50 instead of buying the Framemeister for over $300.
Here is a link for the HD Video converter on EBAY
Here is a link to the Framemeister on Ebay.
Thanks to all of you for 6 great years!
RGB mod details over on the ColecoVision forum
Here is a link:
RGB mod outputs awesome video signal and dual mono audio through a discreet 8 pin mini din jack on the back of the console. This mod was designed to be used with the XRGB min Framemeister, which converts RGB to HDMI. This is so people play on their LCD/LED TVs with awesome quality picture. There is also a cheap alternative RGB to HDMI converter that I have tested that works excellent. Here is one on Amazon....
I have also seen them on Ebay for around $43 with free shipping. I will sell one 8 pin mini din to SCART cable for use with this scaler at the time of system modification or sale of a pre modified system. I will not sell cables separately. Din to SCART cable is $20.
DIY Composite video Mod board (cord included) Picture below
DIY purchase price for mod board with a/v cord included $29 shipped anywhere in the USA. This board was designed and tested for NTSC. The ColecoVision outputs only mono sound and this mod outputs the mono to both left and right. (dual mono).
If you choose to buy a Composite modded system from another seller on Ebay, Craigslist ect...make sure they are using the LM318 amp chip and not the transistor mod. The transistor get super hot and is prone to failure and there are brightness issues.
Repairs requiring chip replacement extra.
Console refurbished with no mods. $40 + return shipping.
Console refurbished and A/V mod board installed $69 + return shipping, a/v cable included.
Console refurbish and RGB mod installed $129 + return shipping, 6' foot male to male 8 pin mini din cable included for direct connection to XRGB mini Framemeister. Working consoles serviced by me in the past can add the RGB mod for $99, since you have already paid for refurbishing.
Add composite video mod for $29 more.
Controller refurbishing $20 each or 2 for $30 if combined with console refurbish and mod install.
Intro Skip BIOS $15 and Pause Button $35. Or both together for $40. BIOS and Pause only available additionally with console refurbish and RGB and/or A/V mod.
Complete system refurbishing, console and 2 controllers $99 + return shipping. Console refurbished and a/v mod board installed. Controllers refurbished and ball knobs and cords straightened if desired at no extra cost. Add $99 for RGB mod.
You may send your controller(s) separately for refurbishing $20 each + return shipping. Ball knobs and straightening of cords are free optional bonuses
All my mods are shown in this Youtube video I made, with the exception of the Intro Skip BIOS and RGB.
Here is a link to my Intro Skip BIOS thread
and here is a link to my profile. I have links to all my mod threads on my profile.
If you have any questions please feel free to ask.
I added 2 clear LEDs that light up blue. Power LED comes on when power switch is turned on. Pause LED blinks when Pause switch is flipped on. 4 second video showing blinking pause LED. LEDs $15 each.
Parts currently not available
This mod eliminates the unreliable original power supply. 12V regulated power supply with barrel plug inserted into barrel jack on the back of the system. 5V and -5V are supplied by internal mods. 5V is supplied to original power plug so that Roller Controller can be used. Parts are expensive for this mod $55 + return shipping when combined with console refurbish and A/V mod for $69, system refurbish and a/v mod for $99, or system refurbish and A/V mod + BIOS and Pause for $139. Also $55 + return shipping for customers that have had their systems modded by me previously and want to add this mod. $69 + return shipping for power mod by itself
Pictures for reference.
Edited by Yurkie, Mon May 11, 2015 11:42 AM.