Atari8bitCarts Posted October 20, 2011 Share Posted October 20, 2011 I'm currently looking to archive labels for Cartridges (I see the diskette image topic). My hope is to build a library of these cartridge labels for distribution as needed. I intend on creating a website. I'm in need of high resolution/clean images for the Atari 8-bit carts. Right off does anybody have: - HES Gridrunner's label - Atari The Learning Phone Thanx. 2 Quote Link to comment Share on other sites More sharing options...
+orpheuswaking Posted October 20, 2011 Share Posted October 20, 2011 Take a look at this topic http://www.atariage.com/forums/topic/161828-hooked-on-8-bit-carts/ and this website http://www.pitfalljones.com/0800-low.htm Gridrunner http://www.pitfalljones.com/0800-cartpic-big/gridrunner.jpg Learning Phone http://www.pitfalljones.com/0800-cartpic-big/learningphonethe.jpg Not specifically just the label as these are pictures of the whole carts, but might save you some time Quote Link to comment Share on other sites More sharing options...
Atari8bitCarts Posted October 20, 2011 Author Share Posted October 20, 2011 Thanx, but those are not high res. Pitfalljones is a great website! but the images cannot be used for reproduction, etc. I'm looking for real clean images of the carts and their labels (all sides). Thanx. Quote Link to comment Share on other sites More sharing options...
+orpheuswaking Posted October 20, 2011 Share Posted October 20, 2011 NOOOOO U WANTZ TO MAKE FAKE CARTSSSSS Unfortunately I don't have either of the carts you are looking for, sorry... 2 Quote Link to comment Share on other sites More sharing options...
Atari8bitCarts Posted October 20, 2011 Author Share Posted October 20, 2011 (edited) Funny, no, not to just make fake carts. At some point these carts and mostly their labels will no longer make it. 30+ years is a long time to ask. Most glue is failing now. We should capture these now why we can. There is no way to 100% produce remakes, and I note mine But if an existing original cart needs a label, it should get one Edited October 20, 2011 by chrislynn5 1 Quote Link to comment Share on other sites More sharing options...
qix_maniac Posted October 20, 2011 Share Posted October 20, 2011 why would I support this! making fake carts will devalue the huge collection I've acquired! Someday when I'm in a wheelchair and can no longer use a joystick I plan on selling my carts I also like pitfall jones site but it's incomplete maybe you should enhance that site by creating a complete collection instead of making fake carts. Quote Link to comment Share on other sites More sharing options...
Atari8bitCarts Posted October 20, 2011 Author Share Posted October 20, 2011 This is NOT making fake carts. I am not making boards, chips, cases, etc. Please let's move past this. I do have carts that need labels, and no I do not sell them as original. I note every label I make. But agian, this is about archiving our labels. They will NOT last when we are old. And yes, I am an avid supportor of "keep our carts original". If you know me, I don't buy copies, i.e. KJman without wanting to know they are copies and if I do it would be for fun (just to play a game). Pitfall Jones is awsome, and I've contributed to some of the images. I use it for my personal mission to make a "live" version of it soon But the images are not the best, etc. And yes, I would consider his site being the definitive source. It should be 30 year old glue can not be expected to make it much longer Quote Link to comment Share on other sites More sharing options...
+orpheuswaking Posted October 20, 2011 Share Posted October 20, 2011 My bad for making silly jokes... I don't think Chris is doing anything other than wanting to archive in hires all of the atari cart labels. Quote Link to comment Share on other sites More sharing options...
Atari8bitCarts Posted October 20, 2011 Author Share Posted October 20, 2011 say "No" to naked cartridges. Quote Link to comment Share on other sites More sharing options...
FULS Posted November 11, 2011 Share Posted November 11, 2011 Hi, My labels are not the best but maybe this helps. Quote Link to comment Share on other sites More sharing options...
Atari8bitCarts Posted November 12, 2011 Author Share Posted November 12, 2011 (edited) Thanx, it seems like Gridrunner's label wasn't meant for 30+ years I see more of those carts, all original, missing the label. The glue must have been really poor on that one. Thanx for the images! I hope to have my carts inventoried and photographed here shortly. High Res for pitfall jones. Edited November 12, 2011 by chrislynn5 Quote Link to comment Share on other sites More sharing options...
LYNXGUY Posted November 22, 2011 Share Posted November 22, 2011 I know that there is an Atari 2600 label maker in the 2600 forums now if someone can use that and turn it into Atari 800 labels your problem might be solved and in fact I would use that for a few labels myself. Quote Link to comment Share on other sites More sharing options...
Atari8bitCarts Posted November 26, 2011 Author Share Posted November 26, 2011 Thanx, I know the website. But that is for 2600 labels, and to make new ones. I'm cataloging the 8-bit carts. Quote Link to comment Share on other sites More sharing options...
LYNXGUY Posted November 28, 2011 Share Posted November 28, 2011 Maybe ask the developers of the 2600 label maker to develop one that makes Atari 800 labels ??? Maybe if enough people ask they might just give it a try. If a person/team/company can make a label maker for the 2600 then they have the smarts to make one for the 800. . . . . . .well at least that's what I am thinking. Quote Link to comment Share on other sites More sharing options...
Atari8bitCarts Posted November 28, 2011 Author Share Posted November 28, 2011 (edited) I don't think it is about smarts persay. But the 2600 carts are pretty much the same style and size. And they typically maintain the same look. The Atari 8-bit carts from Atari come in a few basic styles, brown with text and silver with text, then the XE style. A person could template those (you might have a good idea). But there are lot more "one-off's" I believe for 8-bits compared to 2600 (I could be wrong). 8-bits only have a few hundred carts acompared to the many of the 2600. But the original topic wasn't about making labels as much as preserving them as they are. And for carts where they maintain the original chip, board, and shell the labels are falling off and replacement labels are needed. I have "made" a few replacement labels as a "test" but a mark each with a discrete marking to identifiy those. Never stating the label is original. But in my opinion, if everything is original, that is the only way to get a label again. Edited November 28, 2011 by chrislynn5 Quote Link to comment Share on other sites More sharing options...
Welsh Wizard Posted November 29, 2011 Share Posted November 29, 2011 even if some one wanted to use them for fake cartridges, it would cost more that its worth to produce a true replica that would fool people. for those wanting to keep things tidy seem a good idea to be able to have a back up of a tatty original label, I have one cartridge that is almost impossible to read the label its that tatty, and as it does not have a box , the label would be useful to have, though I doubt I would ever bother to stick it onto the cartridge. Quote Link to comment Share on other sites More sharing options...
Atari8bitCarts Posted November 30, 2011 Author Share Posted November 30, 2011 (edited) I was thinking the same. My point is that if your in the business to "make" repro's it wouldn't just be the label that you are making. It's probably an Atarimax cart with software on it, or recycled chips and boards slapped into a reused housing. I believe that if the cart is original, yet the label couldn't survive 25+ years then making a replacement label isn't a bad thing. But I also believe that it should be marked and communicated that it is a repro-label. Here is my example. I have two original Jawbreaker carts, one missing the label. I've almost got the paper (gloss and semi) and colors down to remake almost any label. But the copy has a distinguishable mark, etc. Edited November 30, 2011 by chrislynn5 Quote Link to comment Share on other sites More sharing options...
qix_maniac Posted November 30, 2011 Share Posted November 30, 2011 I was thinking the same. My point is that if your in the business to "make" repro's it wouldn't just be the label that you are making. It's probably an Atarimax cart with software on it, or recycled chips and boards slapped into a reused housing. I believe that if the cart is original, yet the label couldn't survive 25+ years then making a replacement label isn't a bad thing. But I also believe that it should be marked and communicated that it is a repro-label. Here is my example. I have two original Jawbreaker carts, one missing the label. I've almost got the paper (gloss and semi) and colors down to remake almost any label. But the copy has a distinguishable mark, etc. it's pretty easy to tell the fake from the original...but I guess if you don't plan to re-sell it's ok Quote Link to comment Share on other sites More sharing options...
LYNXGUY Posted November 30, 2011 Share Posted November 30, 2011 I guess if you don't plan to re-sell it's ok This what i am talking about if your cart needs a label then use a label maker to make one as long as you know it is a fake label but you will also know what game it is. I am not saying to use a label maker to fool people or to make $$$ buy saying it is the original label as that would be foolish. Hi qix_maniac can you post a pic of those carts ??? Quote Link to comment Share on other sites More sharing options...
Atari8bitCarts Posted November 30, 2011 Author Share Posted November 30, 2011 I disagree, slightly. I'm not looking to slap an avery label on my cart with hand written indentifier on it. I'm looking to reproduce the label. This occurs in EVERY other collectible market. Look at collectible gas station pumps, they get refrubished and have signs/decals made since they are no longer available. That is what we called "restored" back to original condition. Why are carts any different? The label isn't the only thing that "makes" the cart. A clean housing is very important, without marks and dents, etc. and the chip must be the original chip and board in my opinion. Restoration is an art form in and of itself. People take pride in it. 1 Quote Link to comment Share on other sites More sharing options...
commander Posted March 12, 2018 Share Posted March 12, 2018 I got my the!cart and want to make a custom Label in style of the first text label cartridges. see following picture with donkey kong label. Can somebody help me with a template with fonts colors position, size eg for corel draw, Illustrator.. or similar many thanks Quote Link to comment Share on other sites More sharing options...
Atari8bitCarts Posted March 12, 2018 Author Share Posted March 12, 2018 I disagree, slightly. I'm not looking to slap an avery label on my cart with hand written indentifier on it. I'm looking to reproduce the label. This occurs in EVERY other collectible market. Look at collectible gas station pumps, they get refrubished and have signs/decals made since they are no longer available. That is what we called "restored" back to original condition. Why are carts any different? The label isn't the only thing that "makes" the cart. A clean housing is very important, without marks and dents, etc. and the chip must be the original chip and board in my opinion. Restoration is an art form in and of itself. People take pride in it. The post was brought back from the dead. Just to clarify, making new labels, boxes, and housings is fine, as long as it is identified. Today;s processes and products are superior to that of the 1980's. It's much easier to recreate something that can easily be passed off as an original. I see that occurring now heavily in the 2600 market. Quote Link to comment Share on other sites More sharing options...
commander Posted June 11, 2018 Share Posted June 11, 2018 with the help of a abbuc german member I could Identify the Fonts used for the 1st atari 400/800 Labels Title (STAR RAIDERS II) Font: Salzburg-Bold Computer Games: Font: Salzburg-Regular USE WITH JOYSTICK CONTROLLERS: Font: Salzburg-Bold Atari CXL4029: Font: HammerFat Have Fun 9 Quote Link to comment Share on other sites More sharing options...
+Nezgar Posted June 11, 2018 Share Posted June 11, 2018 Is it my eyes or is the '29' more bold than 'CXL40' ? 1 Quote Link to comment Share on other sites More sharing options...
Gunstar Posted June 11, 2018 Share Posted June 11, 2018 I need a new label for my Sega Star Trek Strategic Operations Simulator cartridge! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.