spookt Posted June 26, 2012 Share Posted June 26, 2012 My confusion is removed. My thanks! Quote Link to comment Share on other sites More sharing options...
dkerfoot Posted June 30, 2012 Share Posted June 30, 2012 OK, I have tried searching for this and can't seem to find a good answer. Perhaps because I am simply out of luck. Living in the US, what if any options do I have for feeding VBXE output to my modern LCD TV? I have the following inputs: S-Video, Component, YPbPr, HDMI. I do not have scart, RGB or VGA inputs. This looks promising: http://www.jammaboards.com/store/rgb-to-ntsc-pal-tv-converter-pcb-cv-04.html I don't know a whole lot about the various standards - would using VBXE but then converting the RGB to S-Video eliminate the image quality benefits of the VBXE? Thanks! Quote Link to comment Share on other sites More sharing options...
Rybags Posted June 30, 2012 Share Posted June 30, 2012 (edited) You'd lose some quality - I've got a similar convertor that I've used with mine to capture video. But it'd still likely be noticably better than the S-Video you get from standard Atari and significantly better than RF. Best bet - get an Amiga 1084 or Atari ST monitor (with ST you'd need the 13 pin DIN female plug @ the VBXE end) Next best - get a 15 KHz RGB to Component (Y Pr Pb) convertor, then you could use the component input on your TV. Edited June 30, 2012 by Rybags Quote Link to comment Share on other sites More sharing options...
beamer320i Posted June 30, 2012 Share Posted June 30, 2012 What's the status of this project? Have they shipped as promised yet? Quote Link to comment Share on other sites More sharing options...
sloopy Posted July 1, 2012 Author Share Posted July 1, 2012 status update... The storms on the east coast of the US has nailed me to the wall... altho I had no trees fall on my house and my family is ok, my power will be off until monday or tuesday... sloopy. Quote Link to comment Share on other sites More sharing options...
JohnBuell Posted July 1, 2012 Share Posted July 1, 2012 Best bet - get an Amiga 1084 or Atari ST monitor (with ST you'd need the 13 pin DIN female plug @ the VBXE end) Do you have a wiring diagram for one of these (as in which wires out of the Atari feed into which pins in the female plug)? Quote Link to comment Share on other sites More sharing options...
dkerfoot Posted July 1, 2012 Share Posted July 1, 2012 Best bet - get an Amiga 1084 or Atari ST monitor (with ST you'd need the 13 pin DIN female plug @ the VBXE end) Yeah, I have an SC1224 monitor, but to me, using a tiny little monitor is not really a step forward... Quote Link to comment Share on other sites More sharing options...
enito Posted July 6, 2012 Share Posted July 6, 2012 and the boards? when arrives!!!!! ! ! ! ! ! ! ! ! ! ! ! Quote Link to comment Share on other sites More sharing options...
dkerfoot Posted July 9, 2012 Share Posted July 9, 2012 VBXE (NTSC/XL) for Sale OK - Hate to do this, but after assessing how much free-time I will likely have over the next 8-12 months, I have decided to sell my newly aquired VBXE. I have not used it or started installing it in any way. I was one of the lucky first ones to get it from Sloopy, but I am just not going to have time to do anything with it. It is the NTSC and XL variety. I will ship you exactly what I got from Sloopy. According to his directions, it will also need a <$2 oscillator from Mouser. I'll provide you with the link. Price is the same as what I paid: $150 shipped anywhere in the US. $160 Internationally. Because of the nature of the sale, I can't provide support, etc. You will get exactly what I got from Sloopy along with my good wishes - nothing more. First person to PM me will receive instructions for payment. I can accept PayPal or Google Checkout. If I get no takers in the first few days, I'll put it up for sale on eBay as a Buy Me Now. Note: Please DO NOT order this from me and cancel your order with Sloopy. That would be totally unfair to him. This is for people who missed the chance to order before and/or those who want a 2nd (or 3rd) VBXE. Quote Link to comment Share on other sites More sharing options...
Rybags Posted July 9, 2012 Share Posted July 9, 2012 VBXE should be Pal/NTSC interchangable but you should use the proper master crystal on it for the target system. Quote Link to comment Share on other sites More sharing options...
dkerfoot Posted July 10, 2012 Share Posted July 10, 2012 VBXE has been sold and shipped to Visionik. Quote Link to comment Share on other sites More sharing options...
as... Posted July 16, 2012 Share Posted July 16, 2012 Hello ! I will buy vbxe. Are they still on sale? Quote Link to comment Share on other sites More sharing options...
spookt Posted July 16, 2012 Share Posted July 16, 2012 Did shipping occur yet? Haven't set up camp at the post box yet ... Quote Link to comment Share on other sites More sharing options...
beamer320i Posted July 17, 2012 Share Posted July 17, 2012 So, has shipping occured yet? What's the staus of this project? Quote Link to comment Share on other sites More sharing options...
sloopy Posted July 18, 2012 Author Share Posted July 18, 2012 Sorry, I have been working alot at my job since this storm so havnt been able to get much done around the hobby... I am hoping to get back on it tonight/tomorrow at the latest... The package to the UK hasnt shipped yet... It is whats first on my list tonight... followed by installs for the machines that need to be done of the first batch... sloopy. 1 Quote Link to comment Share on other sites More sharing options...
FastRobPlus Posted July 19, 2012 Share Posted July 19, 2012 Sloopy - will you be broadcasting on Ustream again when you work on these? Quote Link to comment Share on other sites More sharing options...
sloopy Posted July 19, 2012 Author Share Posted July 19, 2012 Sloopy - will you be broadcasting on Ustream again when you work on these? yes, i was streaming today (think i still am), I have one that was having a thermal issue, i think i fixed... was trying the dragon cart while it was warming up... later tonight tho I will be streaming and working on them... after about 22:00 EDT. sloopy. Quote Link to comment Share on other sites More sharing options...
Shou Posted July 20, 2012 Share Posted July 20, 2012 Sloopy - will you be broadcasting on Ustream again when you work on these? yes, i was streaming today (think i still am), I have one that was having a thermal issue, i think i fixed... was trying the dragon cart while it was warming up... later tonight tho I will be streaming and working on them... after about 22:00 EDT. sloopy. Just wondering where I am in the queue.... Quote Link to comment Share on other sites More sharing options...
sloopy Posted July 20, 2012 Author Share Posted July 20, 2012 Sloopy - will you be broadcasting on Ustream again when you work on these? yes, i was streaming today (think i still am), I have one that was having a thermal issue, i think i fixed... was trying the dragon cart while it was warming up... later tonight tho I will be streaming and working on them... after about 22:00 EDT. sloopy. Just wondering where I am in the queue.... The VBXE I speak of above (with the issue of RGB output going blank after its warm), is the one for your machine... its been an hour without an issue, so it seems its golden... wish i was as handy with my dragon cart :'( sloopy. Quote Link to comment Share on other sites More sharing options...
spookt Posted August 8, 2012 Share Posted August 8, 2012 Bumpety bump. Any news? Quote Link to comment Share on other sites More sharing options...
spookt Posted August 9, 2012 Share Posted August 9, 2012 Bumpety bump. Any news? Guess not then Quote Link to comment Share on other sites More sharing options...
beamer320i Posted August 9, 2012 Share Posted August 9, 2012 And it's a bump from me - we need movement on this now please. Enough is enough. Quote Link to comment Share on other sites More sharing options...
Shou Posted August 10, 2012 Share Posted August 10, 2012 Sloopy - will you be broadcasting on Ustream again when you work on these? yes, i was streaming today (think i still am), I have one that was having a thermal issue, i think i fixed... was trying the dragon cart while it was warming up... later tonight tho I will be streaming and working on them... after about 22:00 EDT. sloopy. Just wondering where I am in the queue.... The VBXE I speak of above (with the issue of RGB output going blank after its warm), is the one for your machine... its been an hour without an issue, so it seems its golden... wish i was as handy with my dragon cart :'( sloopy. Is it good to go now? Quote Link to comment Share on other sites More sharing options...
beamer320i Posted August 13, 2012 Share Posted August 13, 2012 Bump. Quote Link to comment Share on other sites More sharing options...
spookt Posted August 13, 2012 Share Posted August 13, 2012 Guess he may be on holiday as my PM didn't get a response either. Hope you're OK Sloopy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.