unebonnevie Posted March 15, 2015 Share Posted March 15, 2015 Is 0.1" (2.54mm)? Thank you! I am trying to see if I can do a RAM expansion board through the cartridge port or the expansion port. It seems like I have to have something called the PEB (TI's original expansion board) to do a RAM expansion board through the expansion port? Or, as another choice, I can do a RAM expansion via the cartridge port? Thanks! Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted March 16, 2015 Share Posted March 16, 2015 You won't be able to do a 32K RAM expansion through the cartridge port--you don't have access to all of the address lines you need there. You can use the side port to make one though--and without the PEB. There are at least a dozen commercial variants that did just that back in the day. And 0.1" is 2.54mm, I just included both equivalents as we have folks from all over the world here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.