juice2839 Posted October 31, 2015 Share Posted October 31, 2015 In the Halloween theme I have created the Franken-Coleco-Stein - AKA CV with the AY-3-8912 hooked up.... Still need the bank switch bios rom to ram circuit hooked up, but closer......... 3 Quote Link to comment Share on other sites More sharing options...
+grips03 Posted October 31, 2015 Share Posted October 31, 2015 if you do make these, Nintendo Famicom cartridge fits into the Colecovision expansion slot opening very nicely. Quote Link to comment Share on other sites More sharing options...
juice2839 Posted October 31, 2015 Author Share Posted October 31, 2015 if you do make these, Nintendo Famicom cartridge fits into the Colecovision expansion slot opening very nicely. I have no idea how the famicom memory maps the Ay-8-8912 sound IC or even if the cartridges pinouts are close. This is mapped at the 50H 51H and 52H positions so it's SGM compatible. Although I also have 24K memory enabled all the time on this CV it still doesn't play SGM games.. I suspect I need the bios rom/ Ram bank switching circuit too. Quote Link to comment Share on other sites More sharing options...
NIAD Posted October 31, 2015 Share Posted October 31, 2015 I have no idea how the famicom memory maps the Ay-8-8912 sound IC or even if the cartridges pinouts are close. Think what grips03 is getting at is that the Nintendo Famicom cartridge shell fits into the Expansion Interface opening and if you were to proceed with this project further with a commercial release, the cartridge shells could be repurposed to house the PCB you design. The only down side would be that there wouldn't be a leg/post to support the weight like the Coleco ADAM AutoDialer has... which is what Opcode used as inspiration for his SGM plastic shell. Quote Link to comment Share on other sites More sharing options...
Kiwi Posted October 31, 2015 Share Posted October 31, 2015 I think if you play the ADAM supergames, it uses the bios routines. I believe the MSX port map out the bios and use the extra 8KB of RAM. Quote Link to comment Share on other sites More sharing options...
+grips03 Posted October 31, 2015 Share Posted October 31, 2015 Think what grips03 is getting at is that the Nintendo Famicom cartridge shell fits into the Expansion Interface opening and if you were to proceed with this project further with a commercial release, the cartridge shells could be repurposed to house the PCB you design. The only down side would be that there wouldn't be a leg/post to support the weight like the Coleco ADAM AutoDialer has... which is what Opcode used as inspiration for his SGM plastic shell. yes, what NIAD said Quote Link to comment Share on other sites More sharing options...
juice2839 Posted October 31, 2015 Author Share Posted October 31, 2015 (edited) yes, what NIAD said My bad. I over analyzed what you were talking about That's what happens when you're doing Boolean algebra at breakfast for the first time in forever. I plan to get it all working with discreet TTL and then fitting it in a CPLD probably a xl9536. Right now just seeing if I can get it all to work. The AY-3-8912 uses some stupid addressing. It sure was not meant to interface with the z-80 cpu. Oh yeah and a shout out to Nanochess for this test rom. Thanks for putting the time into making this nice test utility program. Edited October 31, 2015 by juice2839 1 Quote Link to comment Share on other sites More sharing options...
juice2839 Posted October 31, 2015 Author Share Posted October 31, 2015 I think if you play the ADAM supergames, it uses the bios routines. I believe the MSX port map out the bios and use the extra 8KB of RAM. I think you are correct and thanks Kiwi. I tried Galaga (Not sure who programmed this, but it's a really good port). The sounds are really accurate I think. Is there some list of what games are what? Like a list of all games that run on this setup I have (basically an Adam I guess) and what needs the SGM that bank switches? Quote Link to comment Share on other sites More sharing options...
CrazyBoss Posted November 1, 2015 Share Posted November 1, 2015 If you have the 24k enabled all time the games think it's an Adam all the sgm games I converted detect for if 24k is enabled if so detect for ay chip. If no 24k is enabled then try to enable it and check and then check for ay chip. But if the game uses the BIOS to check if it's an Adam it will not work.... Quote Link to comment Share on other sites More sharing options...
juice2839 Posted November 1, 2015 Author Share Posted November 1, 2015 If you have the 24k enabled all time the games think it's an Adam all the sgm games I converted detect for if 24k is enabled if so detect for ay chip. If no 24k is enabled then try to enable it and check and then check for ay chip. But if the game uses the BIOS to check if it's an Adam it will not work.... Excellent. Thank you for the heads up. What games did you produce Crazyboss? and hows the weather in Sweden? Quote Link to comment Share on other sites More sharing options...
Kamshaft Posted November 1, 2015 Share Posted November 1, 2015 I'm generally a pretty technical person (not an engineer), AND I have no idea what this is! Looks like a SGM clone or something. Do tell! Quote Link to comment Share on other sites More sharing options...
juice2839 Posted November 1, 2015 Author Share Posted November 1, 2015 I'm generally a pretty technical person (not an engineer), AND I have no idea what this is! Looks like a SGM clone or something. Do tell! Yes SGM clone. I'm planning to make it work with all discreet TTL just for the fun of it I'll fit it in a Xilinx CPLD after. Quote Link to comment Share on other sites More sharing options...
Kamshaft Posted November 1, 2015 Share Posted November 1, 2015 That's really cool! Quote Link to comment Share on other sites More sharing options...
juice2839 Posted November 3, 2015 Author Share Posted November 3, 2015 That's really cool! Thanks, and now I have it working 100% with bank switching the lower ram.. Plays all the SGM games now 2 Quote Link to comment Share on other sites More sharing options...
Kamshaft Posted November 3, 2015 Share Posted November 3, 2015 Again, that's really cool. What are your plans with it? Meaning, are you going to put something on the market? (This Atariage market) or just for fun? Quote Link to comment Share on other sites More sharing options...
NIAD Posted November 4, 2015 Share Posted November 4, 2015 Thanks, and now I have it working 100% with bank switching the lower ram.. Plays all the SGM games now Congrats! Next up, build an SD Drive for the ADAM that is compatible with disk and data pack image files... a lot of people have been hoping for that one for years. Quote Link to comment Share on other sites More sharing options...
juice2839 Posted November 4, 2015 Author Share Posted November 4, 2015 Congrats! Next up, build an SD Drive for the ADAM that is compatible with disk and data pack image files... a lot of people have been hoping for that one for years. I've never owned an Adam. When I was a kid in the 80's I wanted one, but got a TRS-80 coco instead. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.