RFWarrior Posted September 25, 2016 Share Posted September 25, 2016 Just getting back to this Tandy 1000TX project I picked up a while back. I'd like to install a USB floppy emulator. Before I start, has anyone here done this with a 1000TX? Thanks, James Quote Link to comment Share on other sites More sharing options...
Great Hierophant Posted September 25, 2016 Share Posted September 25, 2016 It can work and others elsewhere have used a Gotek with a TX with good results : https://www.vogons.org/viewtopic.php?f=46&t=43416&start=40#p481689 One thing you must do is to create an untwisted floppy cable with the holes punched through the appropriate wires : http://nerdlypleasures.blogspot.com/2014/05/practical-issues-with-tandy-1000-sx-and.html 1 Quote Link to comment Share on other sites More sharing options...
RFWarrior Posted September 26, 2016 Author Share Posted September 26, 2016 It can work and others elsewhere have used a Gotek with a TX with good results : https://www.vogons.org/viewtopic.php?f=46&t=43416&start=40#p481689 One thing you must do is to create an untwisted floppy cable with the holes punched through the appropriate wires : http://nerdlypleasures.blogspot.com/2014/05/practical-issues-with-tandy-1000-sx-and.html Thanks for the info, I'll check it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.