+Vorticon Posted August 15, 2017 Share Posted August 15, 2017 Nano requires 5v regulated 2a Sent from my LG-H830 using Tapatalk That may be so, but not in my case On a side note, why would it require that much current to start with? 2A is a heck of a lot of current... 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted August 15, 2017 Share Posted August 15, 2017 I dunno, 2000 ma seems reasonable to me. A little overhead never hurts, and it sure beats the consequences of not enough. Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted August 15, 2017 Share Posted August 15, 2017 I remember 5 Volt 700 mA, (so I run 1000mA) Quote Link to comment Share on other sites More sharing options...
+Vorticon Posted August 15, 2017 Share Posted August 15, 2017 I remember 5Volt 700 mA, (so I run 1000mA) That seems much more reasonable... Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted August 15, 2017 Share Posted August 15, 2017 and I slightly remember that there was an older CF7 version with 7 Volts (but am not sure about) Quote Link to comment Share on other sites More sharing options...
globeron Posted August 19, 2017 Share Posted August 19, 2017 Nano requires 5v regulated 2a Sent from my LG-H830 using Tapatalk Hmmm. Might that be the reason why my serial port never worked before? (I am using 5V 600mA) Quote Link to comment Share on other sites More sharing options...
globeron Posted August 19, 2017 Share Posted August 19, 2017 I remember 5 Volt 700 mA, (so I run 1000mA) Hi Ralf, if Greg / Arcadeshopper does not have problems with NanoPeb, maybe it is the 2000mA (as we both have that serial port problem). Maybe it requires more power. 1 Quote Link to comment Share on other sites More sharing options...
globeron Posted August 19, 2017 Share Posted August 19, 2017 Mine sometimes blanks out when it hasn't been on for a while. For me a simple reboot/ reset of the TI does the trick. After 6 days. I tried again (and at the desk I work, but I also did that test last week). I am now also thinking it can be power supply related. but now I have both nano-PEBs back to work again. But I have a broken CF-Card 256 Mb Kingston (not working) and when that is inserted it also blanks the screen (I have been swapping between them). (the broken card does not get recognized in the PC at all, to read out contents with TIDIR, etc.) The CF-card that works is a 256 Mb SAN disk (I am aware that these are better, somewhere discussed on the forum). Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted August 19, 2017 Share Posted August 19, 2017 Hi Ralf, if Greg / Arcadeshopper does not have problems with NanoPeb, maybe it is the 2000mA (as we both have that serial port problem). Maybe it requires more power. oh yes maybe ! - I will try a stronger one next time (but still have to unpack and find many things) Quote Link to comment Share on other sites More sharing options...
barry.peterson Posted August 20, 2017 Share Posted August 20, 2017 But I have a broken CF-Card 256 Mb Kingston (not working) ISTR that I had no success with Kingston-brand cards. (And a few others) Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted August 20, 2017 Share Posted August 20, 2017 I sell 4gb cards on Arcadeshopper Sent from my LG-H830 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.