Xebec Posted August 9, 2017 Share Posted August 9, 2017 (edited) I have an untested CO61636 PSU laying around. I believe this is intended for a Atari 1027 printer or 1090XL. If someone has a 1027 printer and wants another PSU or a backup PSU (I don't have a 1027 to test) - please PM me. I'm just looking for shipping reimbursement. If you don't have a 1027 or 1090XL please don't PM me for a free power supply . Attached is a pic of the PSU - Cables appear to be in good order. Edited August 9, 2017 by Xebec 1 Quote Link to comment Share on other sites More sharing options...
Bryan Posted August 9, 2017 Share Posted August 9, 2017 (Indus GT requires a DC supply) 2 Quote Link to comment Share on other sites More sharing options...
Xebec Posted August 9, 2017 Author Share Posted August 9, 2017 (Indus GT requires a DC supply) Lack of sleep has me putting bad info in.. removed.. thanks! 2 Quote Link to comment Share on other sites More sharing options...
+mytek Posted August 9, 2017 Share Posted August 9, 2017 That looks the same as the PSU for a 400/800/1200XL and the 1050. AC voltage looks to be similar. Although the amperage rating looks much higher (40VA @ 9.3VAC =approximately 4.3 amps). - Michael Quote Link to comment Share on other sites More sharing options...
Kyle22 Posted August 9, 2017 Share Posted August 9, 2017 The connector on the end has a larger hole for a larger center pin. It should work on a 400/800/1200XL/850/1050/ etc., but it may be a loose fit and cause power glitches if the cord is wiggled or moved. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.