Posted Sat Sep 30, 2017 10:21 AM
Posted Sat Sep 30, 2017 10:25 AM
Posted Sat Sep 30, 2017 10:35 AM
Do you have the readpaddle kernel option set?
Yes, I have this at the top. And I'm following this example: http://www.randomterrain.com/atari2600memoriesbataribasiccommands.html#pfpixel
I must be doing something wrong but I can't seem to find it.
set kernel_options no_blank_lines readpaddle currentpaddle = 0 drawscreen
Posted Sat Sep 30, 2017 12:48 PM
Ok I'm getting there as it now responds to the paddle and can move around. However as soon as I limit the value of paddle tot 29 (Or whatever other number) it gets stuck at one value and does not respond anymore. Am I missing something with how the paddle works? As far as I can see it should have a value between 0 and 77 so it should be easily capped if I say 'if x > 29 then x = 29' right?
Posted Mon Oct 2, 2017 8:12 PM
set kernel_options no_blank_lines readpaddle drawscreen dim ea = a dim dy = b dim dx = c dim state = w dim x1 = temp1 dim x0 = temp2 dim y1 = temp3 dim y0 = temp4 dim ep = temp3 dim xinc = temp4 dim yinc = temp5 dim delay = h dim rand16 = z dim xpos = k dim ypos = l dim sc1 = score dim sc2 = score + 1 dim sc3 = score + 2 x = 0 y = 0 t = 0 player0: %11000000 %11000000 %00000000 %00000000 %00000000 %00000000 %00000000 %00000000 end player1: %11110000 %11110000 %11110000 %11110000 %00000000 %00000000 %00000000 %00000000 end COLUPF = $62 scorecolor = $2A state = 1 mainloop COLUP0 = $1C COLUP1 = $B4 drawscreen on state goto readjoy drawline doscore ; drawing the line just about takes all of one frames worth of program time goto mainloop readjoy temp1 = (SWCHA ^ $FF) & $F0 ; tests for joy0 RLDU active if !temp1 then mainloop ; predicate true iff temp1 = 0 goto not needed if we're within 128 bytes (and it's the only statement) if joy0up && q > 0 then q = q  1 if joy0down && q < 20 then q = q + 1 if joy0left && p > 2 then p = p  3 ; p is meant to emulate a paddle (sort of) increments by 3 for speed of movement if joy0right && p < 75 then p = p + 3 ; which with the scaling makes the movement a little jerky x1 = (((p/4 + p)/4 + p)/2 + p)/4 ; scales p by 13/32 to get 0..31 y1 = q/2 ; and has the effect of slowing the movement ie 2 frames/q's to change y by one if x1 = x && y1 = y then goto mainloop ; no need to draw the line if x and y haven't changed x = x1 : y = y1 state = 1 : goto mainloop doscore temp6 = x : gosub leftsc ; puts x in the left three digits of score temp6 = y : gosub rightsc ; puts y in the right three digits of score state = 0 goto mainloop drawline x0 = 14 : y0 = 9 : x1 = x : y1 = y gosub clpf setup_line if x0 < x1 then f{2} = 1 : dx = x1  x0 else f{2} = 0 : dx = x0  x1 if y0 < y1 then f{1} = 1 : dy = y1  y0 else f{1} = 0 : dy = y0  y1 xpos = x0 : ypos = y0 if dx > dy then xmajor ; initializes ea to 1/2 for better accuracy, symmetry f{0} = 0 : xinc = xinc_tbl[f] : yinc = yinc_tbl[f] : ea = dy/2 : ep = y1 goto yentry yloop ypos = ypos + yinc temp1 = ea ea = ea  dx if temp1 < ea then ea = ea + dy : xpos = xpos + xinc yentry ; plots a pf pixel temp1 = xpos/8 temp1 = ypos * 4  temp1 temp2 = xpos & $0F var0[temp1] = var0[temp1]  setbyte[temp2] ; setbyte is the kernel table for setting playfield bits if ypos <> ep then yloop ; loops if not at end in major direction in this case y but not sure it wont miss its x state = 2 : goto mainloop xmajor f{0} = 1 : xinc = xinc_tbl[f] : yinc = yinc_tbl[f] : ea = dx/2 : ep = x1 goto xentry xloop xpos = xpos + xinc temp1 = ea ea = ea  dy if temp1 < ea then ea = ea + dx : ypos = ypos + yinc xentry ; plots a pf pixel temp1 = xpos/8 temp1 = ypos * 4  temp1 temp2 = xpos & $0F var0[temp1] = var0[temp1]  setbyte[temp2] if xpos <> ep then xloop state = 2 : goto mainloop data yinc_tbl $FF, $FF, $01, $01, $FF, $FF,$01, $01 end data xinc_tbl $FF, $FF, $FF, $FF, $01, $01, $01, $01 end pf playfield: ................................ ................................ ................................ ................................ ................................ ................................ ................................ ................................ ................................ ................................ ................................ end return ; fastest way to clear playfield clpf var0=0:var1=0:var2=0:var3=0:var4=0:var5=0:var6=0:var7=0:var8=0:var9=0:var10=0:var11=0:var12=0:var13=0:var14=0:var15=0:var16=0:var17=0:var18=0:var19=0:var20=0:var21=0:var22=0 var23=0:var24=0:var25=0:var26=0:var27=0:var28=0:var29=0:var30=0:var31=0:var32=0:var33=0:var34=0:var35=0:var36=0:var37=0:var38=0:var39=0:var40=0:var41=0:var42=0:var43=0 return leftsc sc1 = 0 : sc2 = sc2 & 15 if temp6 >= 100 then sc1 = sc1 + 16 : temp6 = temp6  100 if temp6 >= 100 then sc1 = sc1 + 16 : temp6 = temp6  100 if temp6 >= 50 then sc1 = sc1 + 5 : temp6 = temp6  50 if temp6 >= 30 then sc1 = sc1 + 3 : temp6 = temp6  30 if temp6 >= 20 then sc1 = sc1 + 2 : temp6 = temp6  20 if temp6 >= 10 then sc1 = sc1 + 1 : temp6 = temp6  10 sc2 = (temp6 * 4 * 4)  sc2 return rightsc sc2 = sc2 & 240 : sc3 = 0 if temp6 >= 100 then sc2 = sc2 + 1 : temp6 = temp6  100 if temp6 >= 100 then sc2 = sc2 + 1 : temp6 = temp6  100 if temp6 >= 50 then sc3 = sc3 + 80 : temp6 = temp6  50 if temp6 >= 30 then sc3 = sc3 + 48 : temp6 = temp6  30 if temp6 >= 20 then sc3 = sc3 + 32 : temp6 = temp6  20 if temp6 >= 10 then sc3 = sc3 + 16 : temp6 = temp6  10 sc3 = sc3  temp6 return busy COLUP0 = $1C COLUP1 = $B4 drawscreen goto busy
Edited by bogax, Mon Oct 2, 2017 8:48 PM.
Posted Tue Oct 3, 2017 1:36 AM
Here I've rearranged your code some.I added some code to test if any of the joy0 RLDU are pressed andskip the line drawing if notjoy0 is bits 7..4 of SWCHA and a bit reads 0 if it's activeso it inverts SWCHA, masks for bits 7..4 and loops back if none are 1I used variables p and q and let p range from 0..75 and q 0..20p is then scaled by 13/32 to get 0..31 for xand q is divided by 2 to get 0..10 for ythat's just to to show one way of dealing with a range of 0..77and I added a test to see if x, y have changed no need to draw the (same) line again if notI added a test to end the line when we've reached the right point in the major directionnot sure you'll always be at the right spot in the minor directioninitializes ea to 1/2 the delta for better accuracy and symmetryadded a custom point plotting bit to improve the speedadded a custom routine to clear the playfieldI rewrote the line drawing for better speed but it still goes over time on long linesif you're also doing the score so I split the line drawing, putting x,y in the scoreand reading joy0 among different framesset kernel_options no_blank_lines readpaddle drawscreen dim ea = a dim dy = b dim dx = c dim state = w dim x1 = temp1 dim x0 = temp2 dim y1 = temp3 dim y0 = temp4 dim ep = temp3 dim xinc = temp4 dim yinc = temp5 dim delay = h dim rand16 = z dim xpos = k dim ypos = l dim sc1 = score dim sc2 = score + 1 dim sc3 = score + 2 x = 0 y = 0 t = 0 player0: %11000000 %11000000 %00000000 %00000000 %00000000 %00000000 %00000000 %00000000 end player1: %11110000 %11110000 %11110000 %11110000 %00000000 %00000000 %00000000 %00000000 end COLUPF = $62 scorecolor = $2A state = 1 mainloop COLUP0 = $1C COLUP1 = $B4 drawscreen on state goto readjoy drawline doscore ; drawing the line just about takes all of one frames worth of program time goto mainloop readjoy temp1 = (SWCHA ^ $FF) & $F0 ; tests for joy0 RLDU active if !temp1 then mainloop ; predicate true iff temp1 = 0 goto not needed if we're within 128 bytes (and it's the only statement) if joy0up && q > 0 then q = q  1 if joy0down && q < 20 then q = q + 1 if joy0left && p > 2 then p = p  3 ; p is meant to emulate a paddle (sort of) increments by 3 for speed of movement if joy0right && p < 75 then p = p + 3 ; which with the scaling makes the movement a little jerky x1 = (((p/4 + p)/4 + p)/2 + p)/4 ; scales p by 13/32 to get 0..31 y1 = q/2 ; and has the effect of slowing the movement ie 2 frames/q's to change y by one if x1 = x && y1 = y then goto mainloop ; no need to draw the line if x and y haven't changed x = x1 : y = y1 state = 1 : goto mainloop doscore temp6 = x : gosub leftsc ; puts x in the left three digits of score temp6 = y : gosub rightsc ; puts y in the right three digits of score state = 0 goto mainloop drawline x0 = 14 : y0 = 9 : x1 = x : y1 = y gosub clpf setup_line if x0 < x1 then f{2} = 1 : dx = x1  x0 else f{2} = 0 : dx = x0  x1 if y0 < y1 then f{1} = 1 : dy = y1  y0 else f{1} = 0 : dy = y0  y1 xpos = x0 : ypos = y0 if dx > dy then xmajor ; initializes ea to 1/2 for better accuracy, symmetry f{0} = 0 : xinc = xinc_tbl[f] : yinc = yinc_tbl[f] : ea = dy/2 : ep = y1 goto yentry yloop ypos = ypos + yinc temp1 = ea ea = ea  dx if temp1 < ea then ea = ea + dy : xpos = xpos + xinc yentry ; plots a pf pixel temp1 = xpos/8 temp1 = ypos * 4  temp1 temp2 = xpos & $0F var0[temp1] = var0[temp1]  setbyte[temp2] ; setbyte is the kernel table for setting playfield bits if ypos <> ep then yloop ; loops if not at end in major direction in this case y but not sure it wont miss its x state = 2 : goto mainloop xmajor f{0} = 1 : xinc = xinc_tbl[f] : yinc = yinc_tbl[f] : ea = dx/2 : ep = x1 goto xentry xloop xpos = xpos + xinc temp1 = ea ea = ea  dy if temp1 < ea then ea = ea + dx : ypos = ypos + yinc xentry ; plots a pf pixel temp1 = xpos/8 temp1 = ypos * 4  temp1 temp2 = xpos & $0F var0[temp1] = var0[temp1]  setbyte[temp2] if xpos <> ep then xloop state = 2 : goto mainloop data yinc_tbl $FF, $FF, $01, $01, $FF, $FF,$01, $01 end data xinc_tbl $FF, $FF, $FF, $FF, $01, $01, $01, $01 end pf playfield: ................................ ................................ ................................ ................................ ................................ ................................ ................................ ................................ ................................ ................................ ................................ end return ; fastest way to clear playfield clpf var0=0:var1=0:var2=0:var3=0:var4=0:var5=0:var6=0:var7=0:var8=0:var9=0:var10=0:var11=0:var12=0:var13=0:var14=0:var15=0:var16=0:var17=0:var18=0:var19=0:var20=0:var21=0:var22=0 var23=0:var24=0:var25=0:var26=0:var27=0:var28=0:var29=0:var30=0:var31=0:var32=0:var33=0:var34=0:var35=0:var36=0:var37=0:var38=0:var39=0:var40=0:var41=0:var42=0:var43=0 return leftsc sc1 = 0 : sc2 = sc2 & 15 if temp6 >= 100 then sc1 = sc1 + 16 : temp6 = temp6  100 if temp6 >= 100 then sc1 = sc1 + 16 : temp6 = temp6  100 if temp6 >= 50 then sc1 = sc1 + 5 : temp6 = temp6  50 if temp6 >= 30 then sc1 = sc1 + 3 : temp6 = temp6  30 if temp6 >= 20 then sc1 = sc1 + 2 : temp6 = temp6  20 if temp6 >= 10 then sc1 = sc1 + 1 : temp6 = temp6  10 sc2 = (temp6 * 4 * 4)  sc2 return rightsc sc2 = sc2 & 240 : sc3 = 0 if temp6 >= 100 then sc2 = sc2 + 1 : temp6 = temp6  100 if temp6 >= 100 then sc2 = sc2 + 1 : temp6 = temp6  100 if temp6 >= 50 then sc3 = sc3 + 80 : temp6 = temp6  50 if temp6 >= 30 then sc3 = sc3 + 48 : temp6 = temp6  30 if temp6 >= 20 then sc3 = sc3 + 32 : temp6 = temp6  20 if temp6 >= 10 then sc3 = sc3 + 16 : temp6 = temp6  10 sc3 = sc3  temp6 return busy COLUP0 = $1C COLUP1 = $B4 drawscreen goto busy
Wow this is great! I'll play around with it when I'm home tonight. Amazing how smooth it runs
Posted Tue Oct 3, 2017 12:12 PM
Here I've rearranged your code some.
Ok I understand most of your code, but I was wondering how you came up with the equation for limiting p between 031. Is there a reason that its all div 2 and div4 instead of 53p/128? I assume there is some limit to the math the atari can do?
The code you gave is perfect, apart from the fact that the y position is changed with up and down. I want to add 3 if statements that make it go down in y when it reaches 0,0 and the player still presses left and the same for (31,0). Sothat you can swoop the entire border with just 2 directions. (soon to be paddles hopefully.) But since the range for x1 needs to be extended from 031 to 047 he equation you gave is not correct. 5p/8 should do the trick but it doesn't. Should I write this as something with only two's?
I've tried to recreate your process in my code and it works reasonably but I get catastrophic failure if I split the movement like this.
enter xpos=14 : ypos=9 pfpixel xpos ypos on x0 = xpos : y0 = ypos if x < 8 then x1 = 0 : y1 = 8x if x> 7 && x < 37 then x1 = x8 : y1 = 0 if x > 36 && x < 44 then x1=29 : y1=36x if x> 45 then x1 = 29 : y1 = 8 gosub setup_move goto pf
Edited by Coolcrab, Tue Oct 3, 2017 12:34 PM.
Posted Tue Oct 3, 2017 1:21 PM
I assume there is some limit to the math the atari can do?
While the 6502 can add and subtract, it does not have multiply or divide instructions. It does have bit shifting instructions, which are the equivalent to times two (shift left) or divide by two (shift right).
Those instructions are ASL and ROL for shift left, LSR and ROR for shift right.
In my tutorial I cover how you would multiple by five by converting
X * 5
to:
X * 2 * 2 + X
Posted Tue Oct 3, 2017 7:19 PM
Ok I understand most of your code, but I was wondering how you came up with the equation for limiting p between 031. Is there a reason that its all div 2 and div4 instead of 53p/128? I assume there is some limit to the math the atari can do?
The code you gave is perfect, apart from the fact that the y position is changed with up and down. I want to add 3 if statements that make it go down in y when it reaches 0,0 and the player still presses left and the same for (31,0). Sothat you can swoop the entire border with just 2 directions. (soon to be paddles hopefully.) But since the range for x1 needs to be extended from 031 to 047 he equation you gave is not correct. 5p/8 should do the trick but it doesn't. Should I write this as something with only two's?
oops, yup I started with 13/32 but decided on more accuracy and forgot to change the comments when I went to 53/128
You're working with 8 bit bytes which limits you to integers 0..255. Any fractional part gets truncated.
so the idea is to keep the partial products as large as possible and not throw anything away before you need to
(with out having them too large, the first partial product is 5/4 before the second division by 4 so would overflow
for anything larger than 4/5 * 255 ie 205/4 + 205 = 256, too big)
You could do what you want with if statements but I'd just have a variable that ranged 0.. 50 (or what ever) and look up
x, y in a table it wouldn't take much more space and it would be a lot faster and it would be much more flexible.
Not sure what you're doing but in the changed code the set up and line drawing are no longer subroutines
although they could be if that was useful but I figured it would be faster if they weren't
Posted Sun Nov 12, 2017 10:59 AM
I finally got some time to spend on this again. I managed to make the line move smooth from lower left to lower right and added in a star that the player needs to track. But its too fast and flies horizontally now.
I was wondering if it is possible to make payer0 rotate around a certain coordinate. Preferably some star appears somewhere in the lower left corner with a random y coordinate and then rises and sets around say the lower central point. (where the telescope is.)
Other than that, as far as I understand I can draw 2 stars at a time. Player1 and 2. Is it possible to draw any more if they behave the same anyway?
Posted Sun Dec 3, 2017 6:07 PM
Thanks to some very useful tips from Bogax I've gotten a new version of the game out. (Download on main post)
Feedback and suggestions welcome!
Posted Mon Dec 4, 2017 1:30 AM
I added a .bin to the main post
Posted Mon Dec 4, 2017 2:12 AM
What's the difference between the two .bin files?
Posted Mon Dec 4, 2017 3:54 AM
Not really. old versions are just fine I'm sure.
Posted Mon Dec 4, 2017 4:15 AM
I guess that the name can be confusing.
I was also thinking of changing the score mechanics as to give you X points, and make them go down when observing the star. With each successful observation you need to work away more points and maybe the cloud moves faster. What do you think? (assuming that you tried it)
Posted Mon Dec 4, 2017 2:16 PM
New version added to main page. You now got to get the score down from 1000 to 0 before the healthbar runs out. If you manage then you get the health back and score gets rest.
Next step is to make the health lower and score higher for each iteration and perhaps add a second score for #levels.
I think that this can be seen as a demo.
Feedback welcome
Posted Tue Dec 5, 2017 1:30 PM
I will test that tomorrow
Edit : It works well on real hardware, good continuation.
Posted Wed Dec 6, 2017 4:26 PM
V0.5 is out! I added basic sound and changed the score mechanics.
The cloud now starts to move faster with each level and the star moves to a random location. (to simulate the selection of a new star)
I have a problem with the sound though, as it still keeps buzzing if you move the yellow beam off of a star or cloud. Any tips on fixing this?
Other feedback welcome!
Posted Wed Dec 6, 2017 11:27 PM
I have a problem with the sound though, as it still keeps buzzing if you move the yellow beam off of a star or cloud. Any tips on fixing this?
You don't seem to have any REMS and you are using some plain old nondescriptive variables, so it's hard to know what is happening in the program. Things like "if !j" and "if !n" don't tell me anything.
Posted Thu Dec 7, 2017 5:28 PM
I tried to fix the variables but the code is not working, so I'll try again in the weekend. But the important part is this I think. So if it collides with the star it plays sound 3, if it collides with the cloud then it plays sound 1. These sounds keep going unless you put in a stop sound. (as far as I understand) So I added an if for when the fire button is not pressed. But the sound still plays if you keep it pressed and move away from the star.
if collision(player0,playfield) && !collision(player1,playfield) && joy0fire then j = j  1 : AUDC0 = 3 if collision(player1,playfield) && joy0fire then n=n1 : AUDC0 = 1 if !joy0fire then AUDC0 = 0
Posted Thu Dec 7, 2017 9:17 PM
Looks like sound is happening in two lines below that too, so maybe the problem could be there.
Posted Sat Dec 9, 2017 5:13 AM
Looks like sound is happening in two lines below that too, so maybe the problem could be there.
I solved the sound problem, I had to add a sound stop when the beam didn't touch anything.
I also updated the game script to have descriptive variables, which helps I think.
The current change I am trying to make is to add paddle support when the left difficulty switch is set to A. I based it on RT's paddle example and tried to make the beam move as the paddle. However it still has some bugs that I didn't spot yet. (for some reason it goes to a game over when the paddle is all the way on the right)
Also it doesn't seem to work in paddle mode on the emulator (and I did change the control settings and reset the emulator. Could someone confirm?)
However it does work on my starpath supercharger so thats a way to test it.
Also how can I check how much space there is left on the 4k cart? I think that I might be reaching it.
Edited by Coolcrab, Sat Dec 9, 2017 5:16 AM.
Posted Sat Dec 9, 2017 8:20 AM
It won't compile for me. There is a mysterious verbose error message, but I can't find it.
Atari Systems →
Atari 2600 →
Who is the Commavid artist ?Started by strudders, Yesterday, 11:31 AM commavid, artist, 2600 


Community →
Marketplace →
FS: Edladdin Super 78  Atari 2600/7800 Joystick  Killer! $100Started by bszarek001, Yesterday, 9:14 AM 2600, 7800, edladdin, super 78 and 1 more... 


Gaming General →
Hardware →
Homemade atari super vcs {ntsc} 6502 questionsStarted by universal2600, 17 Mar 2018 6502, 6507, cy7c408, atari, 2600 and 5 more... 


Community →
Marketplace →
Every Sears Game 4 Sale Picture & Text Label UPDATEDStarted by Red 5, 16 Mar 2018 Atari, 2600, Sears and 1 more... 


Atari Systems →
Atari 2600 →
Round 2 of the 2018 Harmony Games Spies in the NightStarted by Dan Iacovelli, 8 Mar 2018 2600, homebrew, HSC 

0 members, 0 guests, 0 anonymous users