Polish.Gasoline Posted August 30, 2018 Share Posted August 30, 2018 Hi,Just wondering how to fix this wire on a driving controller, so it is permanently attached. I'm new to this, do I solder the bottom on?Which screws hold the outer casing of a light sixer? So it can hold together.Which screws hold on to an original atari 2600 joystick so I can purchase them? Would a s-video mod be worth it on either console? Is just composite good enough? Just curious. I have done neither on any console before but it would be nice to know before I get my hands dirty. I was thinking of putting a pause button on both regardless. The only thing I have a problem with the jr. is that it has rainbow banding on the rf signal would either remedy this? How do you suggest I take apart a jr.? Do I just take a spludger to the back of it? I ordered so metal spludgers from ebay since no where in my city could I find them. I need to take it apart to fix the "on" light. I'm repairing a "deal" i got on kijiji. It really could be worse but some advice would be awesome. The consoles internals are working correctly so far with a solder job on the light sixer and cleaning of an additional console I got (A jr.). All that was needed on the jr. was to clean the sockets (cartridge and video). I got a large package of controllers that have been cleaned for the most part. I just got some paddles to do and a controller to put screws in. I know this is a lot of questions but hopefully someone can answer them. Thanks AtariAge. Quote Link to comment Share on other sites More sharing options...
Polish.Gasoline Posted August 30, 2018 Author Share Posted August 30, 2018 (edited) Can't edit. Fixed the driver controller by tightening the metal with a good squeeze. Edited August 30, 2018 by Polish.Gasoline Quote Link to comment Share on other sites More sharing options...
Polish.Gasoline Posted September 1, 2018 Author Share Posted September 1, 2018 Found all my shopping atari needs at www.best-electronics-ca.com/ My next question is this if anyone can answer it. Would a s-video mod be worth it on either console? Is just composite good enough? Just curious. I have done neither on any console before but it would be nice to know before I get my hands dirty. I was thinking of putting a pause button on both regardless. The only thing I have a problem with the jr. is that it has rainbow banding on the rf signal would either remedy this? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.