fadlan12 Posted September 13, 2018 Share Posted September 13, 2018 Hi, I have been lurking for a few weeks: I purchased an Atari 2600 from Ebay (i have purchased a few from Ebay) and this one was a non-working composite modded 6 switch. I opened it up and noticed the Audio was wired into the Video and vice versa. I started debugging and noticed that i was reading 9v DC at the 3rd pin of the RF modulator. Mind you the modulator was long gone and i was taking a reading at the now power wire. Does that mean that something is blown on the main board? I replaced the voltage regulator and i am getting 5v at the top pin and ~9 on the bottom pin. I am getting no signal at all on the TV hooked up to the composite. What should I be reading (voltage wise) on the yellow (video) and red/white outputs? should I be getting voltage when the power switch is off? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.