sirlynxalot Posted October 21, 2018 Share Posted October 21, 2018 I have an Atari Lynx 1 that I bought from best electronics a few years ago. It's always worked fine but I believe it is unmodified and still has the very old capacitors and zener diode in it. I understand it is pretty common for these parts to go bad over time, including permanently damaging the lynx, so I'd like to futureproof my lynx by paying someone to recap it and replace the diode. The only thing peculiar to my lynx is that best electronics filled in some of the screw holes with rubber cement to prevent people from taking the system apart and voiding their limited time period warranty. Let me know if you might be able to perform this service for me. I'm located in the USA and would prefer if the person is in the USA as well to avoid a potentially expensive shipping bill. Quote Link to comment Share on other sites More sharing options...
blainelocklair Posted October 22, 2018 Share Posted October 22, 2018 Wow. Filling the holes with rubber cement was kind of a harsh thing. Check with -^Cro§Bow^- (Jesse) at Ivory Tower Collections. He's been at PRGE and off the grid this week, but should be back soon. He can cap Lynx systems and do the zener/MOSFET replacement. He installed my McWill screen, and it's absolutely gorgeous. My Lynx II was already capped and power modded, so I just got the McWill put in. Jesse can definitely do the cpas and power stuff, though, and I 100% recommend him for the quality of his work and his communication. Check out his YouTube channel here to see the work he does, including the McWill install in my Lynx II (it's famous now ): https://www.youtube.com/channel/UC_HoOM485ibil-cmoG5qGTw/videos - Blaine Quote Link to comment Share on other sites More sharing options...
Iwantgames:) Posted October 23, 2018 Share Posted October 23, 2018 Id 2nd -^Cro§Bow^- seems like a good dude and his work looks excellent! Im sending my Lynx to him tomorrow to get recapped and Mcwilled Quote Link to comment Share on other sites More sharing options...
blainelocklair Posted October 24, 2018 Share Posted October 24, 2018 You'll absolutely be pleased with Jesse's work. He is indeed a good dude. I've attached pics of the McWill he did on my Lynx II. Night and day difference. Here's the video from his ITC YouTube channel where he installed the McWill into my exact Lynx II: Blaine Id 2nd -^Cro§Bow^- seems like a good dude and his work looks excellent! Im sending my Lynx to him tomorrow to get recapped and Mcwilled 1 Quote Link to comment Share on other sites More sharing options...
Iwantgames:) Posted October 24, 2018 Share Posted October 24, 2018 You'll absolutely be pleased with Jesse's work. He is indeed a good dude. I've attached pics of the McWill he did on my Lynx II. Night and day difference. Here's the video from his ITC YouTube channel where he installed the McWill into my exact Lynx II: https://www.youtube.com/watch?v=xXONfdxaye8 Blaine Yea mine looks about the same as yours did. But it’s off to get mcwilled now 1 Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted October 29, 2018 Share Posted October 29, 2018 Huh. I have both a Lynx and Lynx II... may have to send mine off, as well. Quote Link to comment Share on other sites More sharing options...
Iwantgames:) Posted November 2, 2018 Share Posted November 2, 2018 Heres my Lynx redone by -^Cro§Bow^- cant wait till it gets home! Quote Link to comment Share on other sites More sharing options...
blainelocklair Posted November 2, 2018 Share Posted November 2, 2018 He is quite good at the mods. Great guy too. Enjoy the Lynx in the new way that only the McWill upgrade can make possible! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.