Heaven/TQA Posted March 7, 2019 Share Posted March 7, 2019 Hi Guys, I am preparing new code for the upcoming Revision 2019 demo party end of April held in Germany. today I got the PSU finally replaced so I could test my PAL 7800 and yeah. Asteroids appeared plus playing sound on the big screen via RF... (jez...did we really played in 80s with such interferences etc ) So to test my stuff on real HW and I need to present my stuff on real machine to the organisers esp. for recording video I was asking if someone can lend me his flash cart where I can simplify my testing and I would revert it right back after easter. my cart at the moment is a 128kb cart with ROM banks at 8000-bfff (1-7) and bank #0 at c000-ffff plus 16k RAM at 4000-7fff, no POKEY. as I am aware I can not buy one right away? Thanks for any response. Cheers, Heaven Quote Link to comment Share on other sites More sharing options...
+groundtrooper Posted March 7, 2019 Share Posted March 7, 2019 The only retail 7800 flash cart that "WAS" available for immediate purchase was the Mateo's 16 in 1. But I have seen a few posts recently that Juan has been very silent and not responding to emails. If you click on the Mateos link in my signature it should direct you to a thread here on AA that has a link to his page but I am not sure what kind of results you will have at this point. Quote Link to comment Share on other sites More sharing options...
gambler172 Posted March 7, 2019 Share Posted March 7, 2019 Well....i coukd test your stuff...no problem.... but my CC2 is too expensive to ship it....and my Concerto needs to serve me..... i also have a proto flash cart,but this only run with Arduino... And Matteos multicart is also in my posses,but might have problems with some 128k But CPUWIZ has a Devcart.....this should be useful. greetings Walter 1 Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted March 8, 2019 Author Share Posted March 8, 2019 Yeah. I know that it will be hard to get one cart but thought I ask... its the revision party rule that entries must shown to be running on real console not just emulation. But still fingers crossed. Quote Link to comment Share on other sites More sharing options...
gambler172 Posted March 8, 2019 Share Posted March 8, 2019 Yeah. I know that it will be hard to get one cart but thought I ask... its the revision party rule that entries must shown to be running on real console not just emulation. But still fingers crossed. Where id this revision party? Which city? Quote Link to comment Share on other sites More sharing options...
gambler172 Posted March 8, 2019 Share Posted March 8, 2019 Also ich wohne 50 km von Saarbruecken weg. Wann geht das Ganze los? Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted March 8, 2019 Author Share Posted March 8, 2019 Also ich wohne 50 km von Saarbruecken weg. Wann geht das Ganze los? https://2019.revision-party.net/ Quote Link to comment Share on other sites More sharing options...
CPUWIZ Posted March 9, 2019 Share Posted March 9, 2019 Kannst Du EPROM's brennen? Koennte Dir eine Platine schicken, mit bankswitching und RAM schon aufgebaut. Kann Ich auch ein Sockel raufpacken, damit du ueberhaupt nicht loeten musst. Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted March 9, 2019 Author Share Posted March 9, 2019 EPROMs brennen sollte heute doch Plug n play sein? Ist das kompliziert? Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted March 14, 2019 Author Share Posted March 14, 2019 Kannst Du EPROM's brennen? Koennte Dir eine Platine schicken, mit bankswitching und RAM schon aufgebaut. Kann Ich auch ein Sockel raufpacken, damit du ueberhaupt nicht loeten musst. ich denke, ich bekomme das hin. Gilt das Angebot noch? Quote Link to comment Share on other sites More sharing options...
CPUWIZ Posted March 14, 2019 Share Posted March 14, 2019 Ja, natuerlich. Auch egal, musst einfach nur Porto bezahlen. Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted March 14, 2019 Author Share Posted March 14, 2019 Let me know PayPal? Quote Link to comment Share on other sites More sharing options...
ongikong Posted March 14, 2019 Share Posted March 14, 2019 (edited) Wegen EPROM brennen schau mal nach dem TL866... Der ist ziemlich günstig und einfach per USB zu bedienen. Edited March 14, 2019 by ongikong Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted March 14, 2019 Author Share Posted March 14, 2019 German invasion? Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted March 14, 2019 Author Share Posted March 14, 2019 Wegen EPROM brennen schau mal nach dem TL866... Der ist ziemlich günstig und einfach per USB zu bedienen. laqiya tl866 Ⅱ Plus Programmer USB EPROM FLASH Bios Programmable Logic Stromkreise 6 Adapter Socket Extractor für 15000 IC https://www.amazon.de/dp/B07DZTJ3DV/ref=cm_sw_r_cp_api_i_L0PICbJGJTW1W ? Quote Link to comment Share on other sites More sharing options...
ongikong Posted March 15, 2019 Share Posted March 15, 2019 Yes, that's the correct one. A direct import from China without all those adapters might be a little cheaper, but I think you need it fast!? Quote Link to comment Share on other sites More sharing options...
CPUWIZ Posted March 15, 2019 Share Posted March 15, 2019 Ich kann Die Platine am Wochenende basteln, und wenn Dur mir das BIN schickst, kann Ich das auch noch testen. @Ingo: Ich werde auch fuer die Sachen mir ansehen, die Du brauchst. Ich bin immer am arbeiten. 1 Quote Link to comment Share on other sites More sharing options...
Shawn Posted March 15, 2019 Share Posted March 15, 2019 I have an extra one of those programmers I would sell cheap. It's a redundant machine to me as I have 2 others that do all the same chips and more. I'm in Canada though so posting to Germany would take a couple weeks to arrive. 1 Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted March 15, 2019 Author Share Posted March 15, 2019 thx Guys for you help here. @Shawn thx for offering help but I guess in the end of the day it's cheaper overall to get them here in mainland Europe even Amazon is your friend... @CPUWiz ok. Ich schick dir eine Testbin am heute Abend und dann schauen wir, wie wir das hinbekommen. wollte schon immer ein EPROM "brennen"... Quote Link to comment Share on other sites More sharing options...
ongikong Posted March 15, 2019 Share Posted March 15, 2019 Danke Dir für die Rückmeldung, Roman! Vielleicht wäre es auch sinnvoll, wenn Du nur einen Brief nach Deutschland sendest und Heaven/TQA sendet die PCB dann im Inland an mich weiter (oder ich an ihn)... :-) Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted March 15, 2019 Author Share Posted March 15, 2019 Kann ich machen. 1 Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.