+Ripdubski Posted March 17, 2019 Share Posted March 17, 2019 I can't seem to connect to a BBS using Atari800MacX 5.0.1 on MacOS 10.14.3, though I think I have everything configured right. Atari800MacX Settings: R: patch enabled R: path port 8888 (incoming, so doesn't matter I think) Load 850 handler via outrun.sys (not sure if this step required) Run terminal software Issue ATDI site.address port (ATDI per the Atari800MacX instructions - ATDT doesn't work either) but I'm getting nothing back What am I doing wrong? Thanx Quote Link to comment Share on other sites More sharing options...
+Nezgar Posted March 17, 2019 Share Posted March 17, 2019 Loading the 850 handler might override the one patched in by the emulator. Have you tried skipping that? Also, even before attempting to 'dial' out - at a minimum, you should get an "OK" response when typing AT then return in ASCII mode. In ATASCII mode it would be AT followed by control-J or control-M... Quote Link to comment Share on other sites More sharing options...
+Ripdubski Posted March 17, 2019 Author Share Posted March 17, 2019 Tried removing the 850 handler from boot. Still not making progress. I do not get an OK response from AT. 1 Quote Link to comment Share on other sites More sharing options...
Gavin1968 Posted August 24, 2021 Share Posted August 24, 2021 On 3/17/2019 at 8:55 AM, Ripdubski said: I do not get an OK response from AT. I am having the same issue, were you able to get it working? Any help would be greatly appreciated. Thanks Gavin Quote Link to comment Share on other sites More sharing options...
+Ripdubski Posted August 25, 2021 Author Share Posted August 25, 2021 Nope. There is another solution in the FujiNet-PC, but compiling it for Mac is proving difficult for me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.