600XL S-Video Mod de jur

[6BQ5]

What is today's latest and greatest 600XL modification that add S-Video output capability?

 

Pics? Schematics? Parts list?

 

Thanks!

[JR>]

Easiest and one of the best is the UAV.

 

https://thebrewingacademy.com/collections/atari-800-xl-xe-xel-xld/products/tba-ultimate-atari-video-uav-board-for-400-800-xl-xe

 

I saw that Nir Dary was looking for an NTSC 600xl to use for a simple video upgrade video. Looking forward to seeing that one.

[flashjazzcat]

Good old SuperVideo for the 600XL is still extremely good.

[Mathy]

Hello guys

 

Good old SuperVideo for the 600XL is still extremely good.

 

Does anyone have that (and the errata that followed) article from Atari Classics in PDF format? (I could scan the pages myself but if somebody already did that...)

 

Sincerely

 

Mathy

[6BQ5]

Easiest and one of the best is the UAV.

 

https://thebrewingacademy.com/collections/atari-800-xl-xe-xel-xld/products/tba-ultimate-atari-video-uav-board-for-400-800-xl-xe

 

I saw that Nir Dary was looking for an NTSC 600xl to use for a simple video upgrade video. Looking forward to seeing that one.

 

My 600XL is a NTSC unit, purchased here from fellow forum member Paul Westphal.

 

Does the UAV assume the machine already has a monitor output jack? I think I would need to add extra components to the UAV.

 

Good old SuperVideo for the 600XL is still extremely good.

 

Is this the mod?

 

http://ftp.pigwa.net/stuff/collections/atari_forever/Extension/Super%20Video%202.1XL/supervid4.html

 

I wish there was a clean, large schematic showing the final circuit. The figures are kind of teeny-tiny.

[JR>]

 

My 600XL is a NTSC unit, purchased here from fellow forum member Paul Westphal.

 

Does the UAV assume the machine already has a monitor output jack? I think I would need to add extra components to the UAV.

 

 

 

The UAV doesn't require the DIN jack. You can bring the signals out of the case any way you desire. It is VERY easy to add the DIN jack. Just remove the ch. 2-3 switch and the DIN jack solder points and holes are already on the MB beneath it.