sisko Posted July 8, 2004 Share Posted July 8, 2004 I need the pinouts for the Atari Touch Tablet, and can't seem to pull anything up on google. Can anyone here help me out? Quote Link to comment Share on other sites More sharing options...
JayoK Posted July 11, 2004 Share Posted July 11, 2004 A delayed response I know, but just back from holidays and only getting to this now. As for the pin outs on the TT I assume you mean the 9-pin connector? Don't have them exactly but I can give you some help here. The TT pulls power from the +5V line on the joystick port and feeds back in the X and Y position using the pokey pots in. The trigger buttons are also made up of the PIA 0-3 or 4-7 lines. i.e. Placing the pen in the bottom in one corner should give a 0,0 (doing this from memory and I recall that the unit worked in reverse) on the POTS readout. If you are coding for this information bear in mind to allow for tolerance as the resolution of 255 in one axis is quite what this unit can do. Quote Link to comment Share on other sites More sharing options...
sisko Posted July 11, 2004 Author Share Posted July 11, 2004 That helps a bit, and should take out quite a bit of the guess work. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.