onklsven75 Posted April 9, 2002 Share Posted April 9, 2002 I've got a 2600 4 switch system that works fine for 10-15 minutes, then the screen goes b/w and gets all fuzzy and slowly gets worse until you can't play anymore. My switch box is working properly. Does anyone know how to fix this? I appreciate it. Quote Link to comment Share on other sites More sharing options...
Skatepunk60 Posted April 9, 2002 Share Posted April 9, 2002 Is your power supply the right one or a homemade type? How about the connections? Try a differnt channel maybe. Quote Link to comment Share on other sites More sharing options...
fmctm1sw Posted April 9, 2002 Share Posted April 9, 2002 I have one that does the same thing. As soon as you turn it off, then back on, it works for another 15 or 20 minutes. Quote Link to comment Share on other sites More sharing options...
Skatepunk60 Posted April 9, 2002 Share Posted April 9, 2002 both four switches? Quote Link to comment Share on other sites More sharing options...
Atarinvader Posted April 9, 2002 Share Posted April 9, 2002 Joe, looks like you've got one for the article This sounds like what happens when the voltage drops when running a 2600 on a 9V battery. I would also suggest that the problem lies with your power supply. Maybe not delivering enough voltage? and that the modulator starts putting out a weak signal? The supply has to be 9V 500mA Quote Link to comment Share on other sites More sharing options...
onklsven75 Posted April 10, 2002 Author Share Posted April 10, 2002 The power supply I'm using is the original one. It works properly for my heavy sixer. I'll try getting a new power supply though. Thanks for the help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.