NGFrankW

... for some reason the firmware.upd file was not renamed to firmware.ovr. After I did that, there was a new QR code link. With this image the update worked completely. Also the missing progress bar was visible with that.

... I noticed also that the progress bar from the setup guide video was NOT visible during the update:

I have also tried to update the GameDrive with QR code from Firmware V1.09, ASIC V1.06, Menu V1.06, Stub V1.03 to Firmware V1.11, ASIC V1.08, Menu V1.08, Stub V1.04 but got only the first two files updated without the Menu and Stub images: Firmware V1.11, ASIC V1.08, Menu V1.06, Stub V1.03 Have also tried to re-flash the images by renaming the firmware.upd to firmware.ovr (I assume the *.ovr will force the update?). How can I force to flash all four images again? Any help is appreciated.

Have finally found a nice one:

would this and the Atari logic fit into the MCC 216 with its 16k Altera Cyclone 3 FPGA ? Best regards Frank

has someone an Atari Sparrow / FX-1 keyboard for sale? They were sold 10 years ago from Best Electronics: http://www.best-electronics-ca.com/falcon.htm German Sparrow QWERTZ Keyboard Assembly Same as Falcon QWERTY Keyboard except main keyboard gray key cap letters are yellow and F1 - F10 Function gray key cap letters are orange in color, CB102622, $65.00 French Sparrow Azerty Keyboard Assembly Same as Falcon AZERTY Keyboard except main keyboard gray key cap letters are yellow and F1 - F10 Function gray key cap letters are orange in color, CB102623, $65.00 I need one for my incomplete Sparrow (only mainboard with both case parts).

Thanks for the clarifications. So there are not two different development paths ? "Supports large SD cards. I tested with a 1GB,2GB,4GB and 32GB" Great improvement! Until now I have tested this with a 2GB SD card.

Hi foft. you have released a new version on last Tuesday (http://www.scrameta.net/autobuild/20140624/) and some new comments in the instructions.txt: MIST: Without keyboard its possible to use it! If you can remember these... MIST: mist button0=F11, mist button0+fire=F12, mist button0+stick=reboot MIST: mist button1=option, mist button1+fire=start, mist button1+stick=select I assume this is a special update for the mist board only ? Have found also this comment at http://arcaderetrogaming.com/shop/page/3 ----------------- ArcadeRetroGaming (ARG) implementation is based on the excellent work out of the retro gaming community from Mark Watson [5] together with additional modifications and enhancements. Mark many thanks for supporting the Multiple Classic Computer with a great new classic computer ! The ATARI 800 XL Core the MCC includes the following features and enhancements: · Support for PAL and NTSC · Drive Emulation with 4 virtual disc slots and one ROM slot · Disk Read and Write support · System configuration allows to change clock, RAM, ROM, Drives and Cartridges ------------------ The *.arg binaries looks different from yours. Have they really enhanced your version as stated or is this just a 1:1 copy of your work ? Frank

Hi foft, my congratulations for your first unified release for four FPGA boards! I have made a quick test of the MCC216 version and it looks already very good. Have discovered only a small graphics glitch with Dimension X, tested with the NTSC VGA core. Looks like there are four fine diagonal RGB stripes. These appear only in this games sequence: A closer look: Presently the settings and load menus are controllable by the joystick and the fire button. Controlling these by the cursor, enter and ESC buttons of the PS2 keyboard would be nice Great release! Frank

Picture found today at eBay: BREAK ? Really self-explanatory

Hope you are still busy with your great project! Have discovered also your two nice ATARI 800 and ATARI7800 ProSystem emulators for the Gizmondo on your website. Perhaps I can re-animate my Gizmondo an try them Frank

Great idea to create a common source code for all supported platforms. Are there big differences between the DE1, MIST, MCC216 and the Replay boards ? Will you create an abstraction layer for the differences ? Frank

Please let me know when the MCC216 edition is ready for tests I have the VGA version. Frank