Jump to content

FireStar

Members
  • Posts

    177
  • Joined

  • Last visited

About FireStar

  • Birthday 08/09/1995

Profile Information

  • Custom Status
    also known as FireStarW elsewhere on the nets
  • Gender
    Male
  • Location
    USA
  • Interests
    Twitch Streaming
    Musics
    Gaming
    Computing
  • Currently Playing
    twitch.tv/firestarw
  • Playing Next
    if I actually fill this out it will look intimidating

Recent Profile Visitors

8,491 profile views

FireStar's Achievements

Chopper Commander

Chopper Commander (4/9)

90

Reputation

  1. It seemed from discord chat, the jailbars varied board revision to board revision.
  2. Crossposting my experiences out of the retrosix discord just so they have more visibility. I found with my particular board revision (rev 14) of the 2600 (America region), there was a resistor soldered onto back pins of the TIA, from pin 6 to 9. After some googling figured out it's a stock atari tweak for improving color (the resistor existed on newer versions of the board out of the box it seemed) sources: https://wiki.console5.com/wiki/Atari_2600#Blanking_resistor_-_(Tech_Tip_4,_11/17/82) and https://forums.atari.io/topic/2967-wavy-lines-jail-bars-rolling-horizontal-bar-through-the-screen-snowy-picture-on-2600s/ Since CleanComp V2 wasn't specifically tuned for this variation, I tested it out and the color change was apparent with the resistor connected, especially over composite. A few comparisons below: Svideo without Resistor: Svideo with blanking Resistor: Composite without Resistor: Composite with blanking Resistor: Svideo without Resistor: Svideo with blanking Resistor: (blur deinterlace from the capture card kinda messes this up) Basically, if you have a rev 14 board, if it already has the blanking resistor installed, add it back after installing cleancomp, if it doesn't have it at all, add it in.
  3. I wanted to play NSMBW for the first (kinda) time, in anticipation of the upcoming Super Mario Wonder. I did not feel like shaking the Wii remote though, and looked up other control options for actual hardware. (emulator can work around this pretty easy) It looked like from some googling, there was an ocarina cheat code to use with wii USB loaders (on your own backed up disc) that would allow one to use a classic controller. Enable Classic Controller [Thomas83Lin] C21EB5B8 00000020 38210050 7C0802A6 80BA0060 48000041 809A0000 7CA52378 90BA0000 80BA0064 4800002D 809A0004 7CA52378 90BA0004 80BA0068 48000019 809A0008 7CA52378 90BA0008 7C0803A6 4E800020 70A40200 --> possible R button line 2C040000 4182000C 3CC07FC0 90DA0010 38C00000 70A40800 2C040000 41820008 60C68000 70A40020 --> possible Y button line 2C040000 41820008 60C60200 70A40040 --> possible B button line 2C040000 41820008 60C60100 70A40001 2C040000 41820008 60C60002 70A40002 2C040000 41820008 60C60008 70A48000 2C040000 41820008 60C60004 70A44000 2C040000 41820008 60C60001 70A40400 2C040000 41820008 60C60010 70A41000 2C040000 41820008 60C61000 7CC53378 60000000 00000000 041EAE30 39800000 041EAE34 91840000 04019EE0 38000000 040B3B30 38000000 2076DBA8 8804A2DC 0476DBA8 38000000 2076DBE9 8804A2DC 0476DBE8 38000000 E0000000 80008000 You'll notice some comments about "possible" button mappings. The controller mapping is Y run, B jump, and R shake. This is fine for the original Classic Controller, but I didn't want to use that controller since the analog shoulder buttons aren't that comfy to use. Ideally I would want to use a Classic Controller Pro, and use ZR for shake since nintendo changed that to the "main" shoulder button (a weird change that persists to today on Switch Pro Controller) There was some information online about remapping the buttons in another game, DKCR, with another Classic Controller Code by Thomas83Lin, that made sense but didn't seem completely applicable, from reddit. The responder mentioned "Classic Controller Button Activator = 28200F0A 0000XXXX." , but the first line in the cheat "28200F0A" wasn't in the DKCR nor NSMBW cheat. This thread does also link an article about the cheat code however, ( http://www.pixlbit.com/news?action=showNewsArticle&newsArticleId=1037 ) which contains comments showing what button binds go with each line of code. Classic Controller Support (v2) C24A5F70 00000020 38210050 7C0802A6 80B50060 48000041 80950000 7CA52378 90B50000 80B50064 4800002D 80950004 7CA52378 90B50004 80B50068 48000019 80950008 7CA52378 90B50008 7C0803A6 4E800020 70A40020 --> button (in this case Y) which triggers the shake 2C040000 4182000C 38C0012D B0D50186 38C00000 70A40800 2C040000 41820008 60C68000 70A40200 --> button (in this case R) which simulates a 1 press 2C040000 41820008 60C60200 70A40040 --> button (in this case B) which simulates a 2 press 2C040000 41820008 60C60100 70A40001 2C040000 41820008 60C60002 70A40002 2C040000 41820008 60C60008 70A48000 2C040000 41820008 60C60004 70A44000 2C040000 41820008 60C60001 70A40400 2C040000 41820008 60C60010 70A41000 2C040000 41820008 60C61000 7CC53378 60000000 00000000 04389B90 38A00000 0438710C 28000009 I searched for similar lines in the NSBMW cheat, which led me to find "70A40200" was the R button bind in the cheat code. I substituted the ZR button activator, giving me "70A40004", and the following code. New Super Mario Bros Wii Enable Classic Controller ZR Mod [Thomas83Lin + Firestarw] C21EB5B8 00000020 38210050 7C0802A6 80BA0060 48000041 809A0000 7CA52378 90BA0000 80BA0064 4800002D 809A0004 7CA52378 90BA0004 80BA0068 48000019 809A0008 7CA52378 90BA0008 7C0803A6 4E800020 70A40004 --> ZR button = shake 2C040000 4182000C 3CC07FC0 90DA0010 38C00000 70A40800 2C040000 41820008 60C68000 70A40020 --> Y button = Run 2C040000 41820008 60C60200 70A40040 --> B button = Jump 2C040000 41820008 60C60100 70A40001 2C040000 41820008 60C60002 70A40002 2C040000 41820008 60C60008 70A48000 2C040000 41820008 60C60004 70A44000 2C040000 41820008 60C60001 70A40400 2C040000 41820008 60C60010 70A41000 2C040000 41820008 60C61000 7CC53378 60000000 00000000 041EAE30 39800000 041EAE34 91840000 04019EE0 38000000 040B3B30 38000000 2076DBA8 8804A2DC 0476DBA8 38000000 2076DBE9 8804A2DC 0476DBE8 38000000 E0000000 80008000 If you want to change any binds yourself, here's the button activator codes from the reddit thread: XXXX Values: 0001: Up DPAD. 0002: Left DPAD. 4000: Down DPAD. 8000: Right DPAD. 1000: Minus (Select) 0800: Home. 0400: Plus (Start) 0008: X. 0020: Y. 0040: B. 0010: A. 2000: L. 0080: ZL. 0200: R. 0004: ZR. Hope this helps anyone wanting to play NSMBW on Wii or WiiU. Alternatively you could play in emulator with a Switch Pro controller or some other 2D controller with motion controls, and a good controller experience while also being able to use the tilt controls for a few levels, since this classic controller code can't implement that.
  4. Ocarina of Time is a Zelda game with a lot of longevity (though basically all of them have that), parts of which being efforts like the Ship of Harkanian (SoH) PC port and Randomizer mods which add a lot of enhancements and replayability to the OOT experience. As a side note, this blog entry is basically to give some SEO for this specific issue, since I assume Google/DDG can crawl Atariage but not a discord server. I wanted to play OOT Randomizer on my Ubuntu 22.10 Linux gaming PC, but I wanted to also use the Nintendo Switch Online N64 Controller that was made recently, so I could use the controller I originally played the game with but wirelessly and with better rumble. After pairing the controller with bluetooth to my PC, I noticed trying to use the controller in SoH wasn't quite plug and play though. If I used it directly with SoH the stick calibration/sensitivity is off and it won't read full forward or back so I can't run/roll. I tried using Steam Input instead which fixed the stick, but Steam doesn't bind R or C-up by default and the interface in Steam to change buttons is bugged and won't apply changes. Using Steam Input meant Running the SoH Appimage through steam. Rumble also was not working. I then found there was a newer driver for switch controllers on linux, hid-nx-dkms. This is not built into the linux kernel yet as of april 2023. I used the hid-nx-dkms driver instead since it has recent changes that aren't mainlined yet, which gave me rumble and a more accurate feeling stick, then since with that driver, Dpad and Z aren't bound by default, which means SoH won't read them, I had to figure out of all apps, only Antimicrox spit out a valid sdl2 remapping , which I could then pass to SoH with the "SDL_GAMECONTROLLERCONFIG=" variable. Note that I wasn't sure which related "SDL_GAMECONTROLLERCONFIG=" was actually applying to the game, since one at a time it didn't seem to work, so I put the remapping string in a "gamecontrollerdb.txt" in the same directory as the SoH appimage, and also did the 2 following commands: #!/bin/bash SDL_GAMECONTROLLERCONFIG="050000007e050000192000000180000014068217,N64 Controller,platform:Linux,a:b0,b:b1,x:b9,y:b8,start:b6,guide:b11,leftshoulder:b2,rightshoulder:b4,leftstick:b7,rightstick:b10,leftx:a0,lefty:a1,lefttrigger:b3,righttrigger:b5,dpup:h0.1,dpleft:h0.8,dpdown:h0.4,dpright:h0.2," SDL_GAMECONTROLLERCONFIG="050000007e050000192000000180000014068217,N64 Controller,platform:Linux,a:b0,b:b1,x:b9,y:b8,start:b6,guide:b11,leftshoulder:b2,rightshoulder:b4,leftstick:b7,rightstick:b10,leftx:a0,lefty:a1,lefttrigger:b3,righttrigger:b5,dpup:h0.1,dpleft:h0.8,dpdown:h0.4,dpright:h0.2," ./soh.appimage The exact mapping I used in my example may not work for you, I noticed I randomly had to remake my mapping as my old one stopped working a few weeks back. After setting the mapping right, I then did get all buttons detected in SoH, with rumble working, and I could finally play some Oot randomizer with original controls! Another user made a PR in the SDL game controller DB which should make this more plug and play, provided the hid-nx-dkms driver gets mainlined. (https://github.com/gabomdq/SDL_GameControllerDB/pull/676) If you're reading this in 2025 and you still have to do any of this, I'm sorry.
  5. Nice to see this is finally out, although I may wind up waiting on v2 since there's already known minor issues. My atari's been without Svideo for 40 years or so so whats another 6 months?
  6. Some end of the year finds, I get to see if the new Yoshi games are actually worth playing or not. Kinda cheating with the second picture because only the calculator and electronics kit were a thrift find, everything else was game store pickups or a christmas present in the case of the star and aeropress...
  7. Finally added a Sega Saturn to the collection after who knows how long, just so I can say I have all the major sega and ninty consoles. With prices how they've been, going into it I know it's just going to be a Daytona USA machine...

    1. SlidellMan

      SlidellMan

      Be sure to buy a Satiator, it is worth it.

    2. FireStar

      FireStar

      i had no idea that existed, seems easier than a drive replacement!

    3. Hydro Thunder

      Hydro Thunder

      Yes, a Satiator or a relatively cheap mod chip to play backups TO THE GAMES YOU ALREADY OWN RITE??? :)  there's a couple of places that do amazing work on quality backups in full color printed DVD sleeves for around $10 apiece if the look matters at all to you.

  8. Found a decent bit of 360 games today, the more expensive ones were the ones missing manuals but I decided to get them anyways... Also found an LCD etch a sketch animator, apparently the succesor for it was like a game console?! There's always some obscure game console you've never heard of. Finally, I also found a golden cousin to the TI SR-51-II calculator I've had for a while, I'll have to use a power supply to see if it works still although it looks like someone tampered with it.
  9. Those DOOM finds are pretty sweet, if I was to collect anything for PC it would be classics like those. Also, Last couple months of thrift finds, not anything too crazy, but I did see CRTs for the first time at a thrift store in ages which I have very barely seen in my area. Got a smaller one for smash bros. events. Also went by a garage sale for the first time in a long time earlier and did grab a Wii box, it was only really exciting since I wanted a spare one for Smash Bros. purposes, and I offered slightly too much since I didn't know ebay prices, but it was nice to see gaming items.
  10. I tried to use the french press but it turns out you use more than just 1 cups worth of water, guess I'll stick with my clever dripper.
  11. Wasn't able to thrift much in february or march due to a car accident, thankfully the car is back and repaired now, but here's the little bit I have found. I haven't tested the Tac-3 joystick yet but the tiny bit of info online says it's atari pinout. Wii Fit U was a more practical pickup since Ring Fit is starting to feel repetitive.
  12. I've always loved the look and form factor of the Coleco Mini Arcades from the early 80's ever since I saw them in the background of Angry Video Game Nerd videos and similar in the late 2000's, and have had one one my wishlist for that amount of time as well. While the Basic Fun and similar modern mini arcade things are cool they aren't nearly as big as the Coleco OGs, although in buying this I did run across 2006 era Excalibur mini arcades I think are actually better looking. I decided to go on a little ebay spree this december/january and decided to pick up a galaxian mini arcade missing stickers, after a google search revealed an AtariAge post linking to an ebay seller of repro stickers. (Good on Atariage for sticking around). In the below video is a rough vlog of the light "restoration" I did which I do believe the end result to be pretty convincing!
  13. I haven't played too much of this recently due to there being so many games out there but I do have fun with making levels, reminds me of using lunar magic back when mario world romhacking started becoming accessible. Going for the world records is maybe even funner to me though. Here's my favorite levels I've made so far. The first one is meant to be an open world sort of exploration level. The second was made for a charity gaming livestream event, Tip of the Hats.
  14. A few months ago I acquired a Sony FD Mavica Camera and wanted to see how it's picture quality stacked up vs both my phone, and my logitech webcam which always looks terrible for what it is. I haven't used a digital camera not on a phone since I was in middle school so going out and using this camera was a foreign experience to me. The resulting photos and additional commentary can be found here:
  15. Here's my past month of thrifts, plus some Five Below finds in the third pic, I want to start sharing these more often again. Reading "Track and Field" and "Konami" on a box made me do a double take.
×
×
  • Create New...