Hey all, I recently purchased a Philips VG8020/00 MSX Home Computer. I'm having some trouble getting a decent video signal out of the thing. When I hook it up to my VCR/DVD Combo via the RF out and convert the signal into composite, I get a glitchy screen, jumping from left to right, going from color to black and white. However, the MSX boot up text is present, and when I press keys on the keyboard, they do get added to the screen. I used the automatic tuning options on my VCR/DVD combo, but it sadly does not improve the quality. I also tried connecting a Sega Mega Drive RGB connector to the Monitor out on the computer, but that didn't do anything apart from making some pop noises. I might have to get a different cable to test that out. I also know for sure that my set-up isn't the problem; I've connected other coaxial game-consoles the same way (Atari 2600, Videopac G7000) and they all work. The unit looks fine and all (no mayor external damage). What I did notice though, was some noises inside the machine when I held it sideways; there could be some dirt in there. Also, some buttons get stuck from time to time (especially the directional buttons). I'll open it up and give it a good clean one of these days. Has anyone here experienced similar problems and got them solved? Any help or advice would be greatly appreciated! I hope the damage (if it has any) is not to severe; would be awesome to get it up and running again! Thanks!