M6iqj

I have club drive and avp when I boot club drive I get full sound and pressing star and * # changes the music . Where I would check for continuity to see if the U20 U21and u25 are working? And I only got 1 controller at the moment I've Miss placed the other one I had . Maybe I should tidy my room up?

The seller said it was a return from back in the day I'll check those out . It's in very good condition. Thanks for the reply

Hi all, I've got a second hand jaguar which has controller port issues. The d pad or abc don't work on the control but * and # keys work fine . The jaguar was sold as faulty I've got another jag and was hoping to get a working unit by using parts from each of them if possible. Can the controller ports be fixed? Is a big task or fairly easy to do if they can be fixed Thanks for your time

We bent the pins back and inserted a cartridge and still no power took the cartridge out and checked the pin and it was bent down again pulled it back up and it snapped off. Anyone no where I can buy the cartridge connector from?

I'm going to a friends house later so he can look at the connector and hopefully fix it. He has a stereo zoom microscope so would be able to look at the connector in more detail . Is there any place in the uk where I can buy a replacement connector for the cartridge port?? Once again thanks for all the replies and all your help

Ill do this in the morning ill bend the pin tomorrow and try it again and report back here

my friend has some of them dentist tools in his work shop ill try a thin tool or what ever I can find to do it. maybe a pin. Thanks for all the replies so far

What did you use to do it with? a pin thin screw driver?

I have a sega master system power supply same a model 1 Sega mega drive I tried that and its still the same no power. I'm going to try bending the pin and see what happens

Just taken a photo of the cart port I've noticed that one pin looks out of place could this be the reason??

im not using the official psu at the moment I'm using a variable power supply I've checked voltages with DVM meter. A friend soldered the chip in using a heat gun. he first removed the caps so as not to damage them when heating the u38 ic. Any to check the ic is working correctly ?

is it easy to bend the pins back into place? if they are bent what are the best way to bend them back to place? I replaced the u38 Ic because it had hole in it and white gunk was coming out.

Hello my first post so here goes. Ive got a jaguar and had it about 20 years or so and had been in the cupboard for ages. a few months ago I fired it and it had a red screen (common fault ) I decided to clean the pins and same issue red screen. Now the jaguar has no power, I've replaced the U38 IC MC34163 and still no power. also found a few traces by the cartridge port have been eating away so I've managed to repair the tracks and still no power. Ive tried a few carts etc and no power, also checked all pins on the cart port with a DVM they seem ok with a continuity checker. Any ideas to what to check now?? or is this jaguar BER?