Mike Karate

Posting an update file for those that want everything since Megapack 3.0 Hope it helps some keep up with tmop69's awesome releases! TI99_Compiled_Games_MEGA_Pack_V3.0.0_Update_1_by_TMOP.zip

Please put me down for 4 boards please.

Are you building a reserve list for this yet or do we just need to go to your site and enter on the list for interested in the original version?

Count me in for one!

Hi everyone! Long time reader but infrequent poster here. I just wanted to let everyone know that I have uploaded a case design on thingiverse for the WiModem. Free to print and use. This version has interchangeable face plates with a few designs I came up with. The pics below have been painted after printing but if you have a multiextrusion printer you could use that for the multiple colors as well. Just wanted to give something back to the community. Hope everyone enjoys and happy computing! Find the file at: https://www.thingiverse.com/thing:2892582

Interested. PM Sent.

It appears I should have been reading the forums more as I just found this thread. I would be interested in one of the new redesigned boards as well! Thanks Ksarul!

I am in for 1 kit either assembled or kit with components.

I am definitely in for one!

I am in for one of these as well!

PM Sent

+1 for me!

Count me in for one please!

That is straight off the plug. The only one I tested off the actual system board was the memory and it was getting 4.92v steady across all mem chips.

well I double checked all the connections and voltages to the mem kit eveything checks out fine. I also cleaned the cart slot and my readings from the ps are as follows: white line: 5.14v blue line: -4.92v red line: 12.20v those were all steady with no fluctuation so I think those would be acceptable. still no go. any other ideas anyone?

I am interested in one of these as well!

Ok got a question and wonder if any one can help. I have installed this component video mod a while back and it worked fine on my tube tv. I still had some graphic issues on the CV so I did the power switch clean. Everything still worked fine testing on a tube tv. I still had video garbage so I decided to do the memory mod from arcadecomponents.com. I have done that and went to power back up but now get a black screen. Here is where I am confused and wonder if anyone can give me ideas. All the traces and voltage on the memory mod test out fine. But all the testing I was doing up till this point was on a tube tv and I now have a LCD HDTV. I have tried the component in on the LCD TV but it doesn't even recognize the signal. I have tried to use a component to VGA adapter cable that my monitor came with and it gets a signal but blank. I have no older tube tv's with component in to see if using it on a LCD tv is the issue. Any ideas would be great. I also have two questions that are specific to this mod #1 Does this mod disable the RF signal? #2 Would the memory mod do anything to make this video mod stop functioning? Thanks to all who have any ideas. I am about to pull my hair out on this one.

Exciting news on all of this development. Can't wait to have one of these to play with. Any idea when ordering will start?

Are pre-orders being taken for these yet? If yes then what is the procedure?

I am definitely interested in getting one....any idea on a ballpark cost on the final product?