[PlusCart (an inexpensive DIY WiFi multicart)]

1 minute ago, Al_Nafuur said:

Is #967 without HSE (external clock)?

yes

[PlusCart (an inexpensive DIY WiFi multicart)]

3 minutes ago, DablioGames said:

I got confused, it's true, I updated my PCB to duo, I'm going to rewrite the FW to pluscart ....

Successfully updated to 2.3.16

[PlusCart (an inexpensive DIY WiFi multicart)]

2 minutes ago, Al_Nafuur said:

🤔 967 seems to be a PlusCart Duo with v102.3.1. I have added this PlusCart to the draft group, but you have to flash v2.3.1 before you can use the WiFi update to v2.3.16. The Duo firmware cannot update via the PlusStore.

I got confused, it's true, I updated my PCB to duo, I'm going to rewrite the FW to pluscart ....

[PlusCart (an inexpensive DIY WiFi multicart)]

33 minutes ago, Al_Nafuur said:

@DablioGames,@CapellãoEu (rascunho) liberei um firmware v2.3.16 que está usando o HSI novamente. Adicionei seus PlusCarts (com PlusStore ID #100 e #109) ao grupo de rascunho do firmware. Você pode verificar se a atualização está funcionando? Suponho que sejam PlusCarts sem relógio externo (HSI)?

i changed my board, the current one has the plustore ID 967

[PlusCart (an inexpensive DIY WiFi multicart)]

3 minutes ago, DablioGames said:

O problema é exatamente esse, testei em uma placa de desenvolvimento que tinha e funcionou corretamente, essa tem um cristal de 8MHZ.

my pcb also has a crystal of 32.768KHZ ... which one is used by the FW ?

[PlusCart (an inexpensive DIY WiFi multicart)]

8 hours ago, Al_Nafuur said:

@DablioGames Acho que o problema é que seu projeto de PCB não possui um clock externo. Mudamos para o relógio externo para a versão de firmware PlusCart v2.3.15 porque é mais preciso que o relógio interno. O firmware do UnoCart para v2.3.15 ainda usa o relógio interno porque o UnoCart não possui relógio externo.

 

 

 

This is exactly the problem, I tested it on a development board that I had and it worked correctly, this one has an 8MHZ crystal.

[PlusCart (an inexpensive DIY WiFi multicart)]

28 minutes ago, Al_Nafuur said:

Yes only the standard PlusCarts get an firmware update from the PlusStore. The PlusCart Duos have to be updated manually (via SD or ST-Link or USB)

 

Can you sent me a screenshot of the STM32CubeProgrammer CPU tab of one of your PlusCarts connected via ST-Link?

 

In this version of the ST_Link program, no recording (which goes well) makes the cartridge work on the console, not even with the FW that has already been tested as 2.3.1 (102.3.1), but I sent the image as requested, the table is filled after pressing the HALT button would it be the same? (I don't use this program as I said) ... but notice that it identified my chip wrong, it says it has 1MB when it actually has 512kb.

 

In the other program I use, my chip is identified correctly and it works any FW I write up to 2.3.1 (102.3.1)... only unocart version 2.3.15 works correctly.

[PlusCart (an inexpensive DIY WiFi multicart)]

3 minutes ago, Al_Nafuur said:

 

@Capellão,@DablioGames

 

Desativei a atualização para v2.3.15 para o Brasil. Você pode verificar se a atualização do cartão SD para v102.3.15 para sua versão do PlusCart-Duo funciona?

 

I don't know what happens, but the pluscart duo updates were not asking for an update over the wi-fi, only the pluscart version, this older one asked for the update to FW 2.3. pluscart duo I tried to install via SD card, but the same thing happened.

Probably the various attempts that you saw to update were mine, I tried on several boards that I had here, but there were 2 computers with problems, but only on the traditional pluscart that asked for an update.

[PlusCart(+) + SD]

On 3/4/2021 at 5:29 PM, Al_Nafuur said:

@DablioGames has already build a production ready hybrid (SMD) PCB for UnoCart and PlusCart. He promised to release it as soon as it is "bug-free".

Will I implement the new changes on the board I designed and make the files available here?

[PlusCart (an inexpensive DIY WiFi multicart)]

26 minutes ago, Al_Nafuur said:

@DablioGames Thanks for the Bug report. I just checked the ROM with v0.15.0 it only shows the title screen, but doesn't starts. Is that what you see too?

exactly

[PlusCart (an inexpensive DIY WiFi multicart)]

In Suicide Mission game, firmware 0.14.6 works perfectly, but in update 0.15.0 it stopped working.

[Latest Harmony Cart software]

Update to CDF bankswitch ?

[Cheap 2K/4K X-in-1 menu driven Multicart for Atari 2600]

I found a simple way to join 4k and 8k games with a little extra hardware and using the same program.

Thank you very much for your help, DrWho198, Blinky, and all who collaborate with this forum!

 

Arthur, como você fez com as tabelas ? Imaginei que em jogos de 8k vc deve ter pulado um numero da sequencia certo ?

 

Em cartuchos com jogos de somente 4k não entendi a necessidade de usar tabelas, vc pode simplismente usar o numero da seleção para tal, tb não entendi porque tem que ser apartir do 128, seja como for, bastava pegar o numero da seleção e adicionar 128 (acho que 127 para dar certo).

 

Voce manja de ASM ou só a parte do hardware ?

 

Abraço