Jump to content
Have You Played Atari Today?
2600|5200|7800|Lynx|Jaguar|Forums|Store

Bmack36

Members
 View Profile  See their activity

  • Posts

    1,133

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Bmack36

  1. Bmack36
    The current service menu core is A0. You should update that first. This will allow you to see the core revision numbers when you go to the core load screen or the core install screen.
  2. Bmack36
    For those with low volume: can you verify you are on rev 6 firmware. It should be listed in the install cores screen or the load cores screen.
  3. Bmack36
    Every little bit helps .
  4. Bmack36
    Now you can try and find the easter egg
  5. Bmack36
    https://github.com/CollectorVision/Phoenix-Colecovision/issues/1
  6. Bmack36
    Where are you stuck?
  7. Bmack36
    You can pre-order one from Collectorvision at their website. There is still no ETA as there are a minimum number needed to do the next production run. https://collectorvision.com/shop/colecovision/collectorvision-phoenix/
  8. Bmack36
    For those who would like to play Wizard of Wor on the Phoenix, Here is the patched version that works. WizardWorHack512.rom
  9. Bmack36
    There is not a requirement for a specific type of system, only the total number of systems needed.
  10. Bmack36
    We are still working on it. I haven't gotten an updated ETA yet.
  11. Bmack36
    A standard cv controller should work fine. Some controllers have issues with the encoder lines. The Super Action controllers themselves can lock up certain games on a real cv if the spinner is positioned in a certain location.
  12. Bmack36
    What controller are you using?
  13. Bmack36
    at least put a spoiler tag?
  14. Bmack36
    Hi Paul. What games are you having issues with? Do some games work and some not, or is everything not working? When you power the system off before plugging the game in, is the red light on (assuming you have updated to v6 core with yellow light)?
  15. Bmack36
    Did you try it on your Phoenix? It should work fine on that.
  16. Bmack36
    It does work correctly on the Phoenix:
  17. Bmack36
    It wasn't working in 7.3 jailbrake (which is the version I have running on mine).
  18. Bmack36
    skill 4: 48,840
  19. Bmack36
    31,820 urgh so close
  20. Bmack36
    SD card needs to be formatted to fat32
  21. Bmack36
    It is correct. Make sure when you download that it doesn't add a (1) or anything like that. Same when transferring to the sd card. Then power it on and hit # to go to service menu. Then hit 1 for install core and then 1 for cv core. The system LED should flash purple while it is updating.
  22. Bmack36
    That is ok. It looks like you are running v3 of the cv core. Put the latest core01.phx on the sd card. Make sure the filename doesn't change when copying it over. Then go to the service menu and hit 1 to install core and then 1 to install the cv core.
  23. Bmack36
    Yes, Can you update the service core from the first post and re-take the picture. Go to the service menu and press 3 to update service menu after you have the new service.phx file on your sd card.
  24. Bmack36
    Can you post a picture of the core loader or core install screen?
  25. Bmack36
    Have you updated to the latest rev of the cv core (6).
AtariAge
Forums
Store
General
Follow AtariAge

Copyright ©1998-2023 AtariAge

×
×
  • Create New...