Higgy

Sounds like the CD support is going well. I better dig out a larger card. Using 1GB at the moment.

Battlesphere Gold boots to a red Jag screen. I have not tried the ROM on an emulator to check it is ok though.

In my best Frankenstein voice "it lives" Well done, super work.

I don't understand the techincal side very well, but well done. You must be v.pleased. 14secs is pretty good as a first stab. I guess that is the time to swap between carts/images. If you don't change the cart/image but power cycle the Jag, loading is instant? Can't wait to see the video.

SainT - If your Trinitron is dead and your stuck for a CRT, I have some spare CRT's and you can borrow/have one with RGB SCART.

69 @SainT - I am a long time lurker here also. Must say, well done on the flash carts you have designed & produced - all way over my head. I can just follow other people's electrical project and make them. I am liking the Jag features that you mentioned in your NeoGeo Pocket video. I just added a 50/60Hz switch to my PAL Jag at the weekend ready for this Hopefully the finished flash carts will be shipped from your location, then I don't have a long postage wait

437 Hello, I have a Vader JR, I believe this was the last 2600 model manufactured. This one (all of them?) was manufactured in Ireland. RF connection is a pain and very poor quality, I am trying to carry out the Composite Mod, but there does not seem much info on doing it on the Vader JR. I tried following a couple of Composite JR guides, but I don't get a picture. Twice now I have tried and then gone back to soldering in the RF Module. Here is my board: Thanks.