ruzapavel

I replaced the drive belt in the second datarecorder as well and I am pleased to report that I was able to write and read and run all 4 files. Thanks for a great job.

If I remember correctly, yes.

Coincidentally with the datarecorder that works I replaced the drive belt on Friday. It has this modification.

I can confirm that only one datarecorder XC12 works reliably for me. I was able to write and load 000_H.E.R.O. (1984)(Activision)(US)[a]_t2k.xex and composite_t2K.xex (both games). I have created 2 sfx files myself and they are working too. For 000_Swapz (2008-01)(Fandal)(CZ)(en)_t2kb.xex I was only able to load two blocks after writing. After that the loading crashed.

Tomorrow when I get back to Prague I'll try out the new sfx3 and possibly make some myself with the new Turgen version. In truth I was surprised that it didn't work, as I had no problem before when copying tapes using Ramtur.

I tested writing and loading the files from this and the previous post on 3 XC12 datasets but unfortunately they failed to load. Tested with atari 130XE with U1MB and SIDE2 and 800XE with SIDE2 only. I tried disabling extended memory, Spartados and PBI BIOS on the 130XE. All unchanged. I tried loading with Uni turbo+ and T2000

Hello I may be wrong but when installing VBXE the oscillator and other components located under Freddie are removed. In my opinion you will have to put them back when you have removed the VBXE. You will probably have to return the other removed/replaced components. Correct me if I am wrong.

Alternatively, you can order the Joystick adapter from here https://monsterjoysticks.com/retro-gaming-adapters