SparkX

Hi, think about this is not normal. Maybe you have installed a Turbo or running at 16MHz or higher..? Here you can get a newer one CPU with more efficient power consumption... -> https://www.exxoshost.co.uk/atari/store2/ (Item #0092) have bought one an my CPU is a lot cooler as before. To my Posting before, solved the Problems. Got the 68882 FPU and GALS and Program, so i get full FPU Support now. Please ask, if you need further Information.

Hi, its me again, after change my home, now, i want to upgrade my STE with FPU. i need the Program to burn the U801 Gal (Pal), In Mega STE Schematic its a PAL 16V8, is that right? Just bought a Programmer for Gal, so i just need the Program to do it. Anyone , who can help or give Informations about? Thanks a lot.. Rene.

hey, ok, thank you, will test the RAM-Solution with preintalled HD-Image.

Hi, found this Page ... -> http://www.atari.8bitchip.info/magic62.html Downloaded the german Download, extract it and see two Files with .img. What to do with these Files to extract them..? All I found on Web are .img is equal to .iso, but I can't extract them. or these are Image (Picture) Files? Please help me... Thanks.

Hi, earlier days, i found a Webpage about burning Magic Ver. 5 (maybe ver. 6) on two Eproms on a ST-Cartridge. Unfortunately i did not bookmarked this Site. Seach again, but i didnt found the Page again. Can you give me a tipp about that..?

Good Morning, i got it. Thx again to ParanoidLittleMan for the Tipp to splitt in even and odd. The (Windows) Bin2Hex-Package contains an app "Splitt2" that splitt a file in two Parts, even and odd, with type in the result Filesize (here 64kB). after this run the two files with Bin2Hex to convert the ASCII to Intel Hex-Format. Burn this with Eprommer to Eprom 27C512, that works fine. Just played Revenge of the Mutant Camels. Thanks again, stay healthy .... My Prommer: -> https://s-huehn.de/elektronik/epromprog/epromprog.htm

Hm, thanks for these Tipps, just tested it with your Hello World.. it worked... Hurray... Hm, done the same with the Revcart.STC, but i got very different Filesizes, STC without 4 Bytes its ok, 131072, after Romsplitt, the filesize remains at 131072 part (hi & lo), ok. can delete the half with 0xED on my Mac. (64.912 Bytes? ) after Bin2Hex i get around 182kB (Intel Hex-Format), burning Eprom stopps at 0FD90 Adress. is that right? Burn just the second Part (Lo) and will test again...

Hi, i m from Germany, so please excuse me for my different ans maybe (bad) english.... Now, i have time to play with my just 5 Years old Atari Hardware. Just made an Eprommer, and had make two PCBs of 128K cartridges. After buying some 27C512 Eproms, i still try to use these on the Cartridges for my 140STF and Mega 4 ST. Unfortunately, i need some Help and advise. i found here and on other Sites some xxx.STC-Files. (Thx to ParanoidLittleMan). Found only an Option to Split thiese ones using Windows XP (Bin2HEX) because my Prommer want to have Intel-Hex-Files to write Eproms. i can Split to two Parts of 64Kb, but i have no success to get this working on my Cartridges. Can someone give me a Step by Step Help? Should i program both Parts (xx.lo and xxx.hi) from same Adeesses in Eproms? Thanks a lot.. its very funny to do Things now, that i have done 35 Years before.