Jump to content

masteries

Members
  • Content Count

    223
  • Joined

  • Last visited

Everything posted by masteries

  1. Last time I tested the game Eliminator, in a 4 MB STE with TOS 1.06; keyboard or gamepad does not respond. I tried it two times, with the same result.
  2. @Dopy25 @obermotz Your hard disk units have been sent, You have a private message with tracking number and how to information,
  3. TOS 1.0 and 1.02 are supported via a custom SD card image if you will to use the low cost hard disk solution However, this special SD card image will not be easily readable under Windows / Linux / Mac As SnarkdluG suggested, TOS 1.04 is the recommended version for your machine; as well with this TOS upgrade, the SD card can be a FAT 16 one, easy to read/write it using your PC
  4. Interested in various PowerA Moga gamepads, But, are you located in America/USA or Europe?
  5. HammerBoy and his frenzy music, a game that is possible to implement as an old LCD handheld Thanks!
  6. The low cost high performance ACSI2STM reaches 1 MB/s actually, first post. As well Teensy based versions reach 1.8 MB/s easily
  7. Release date is near, Meanwhile, a debug video, sprite collision testing:
  8. @tdoug870 Your hard disk unit has been sent, You have a private message with tracking number and "how to" information,
  9. Lee Enfield or Bob Morane the Chevaliere for Atari ST, Amstrad or C64 Be careful, the music can turn you crazy! http://www.youtube.com/watch?v=E38bvF65Kb8
  10. Thanks for ask! In the current batches, I added a prototyping area in order to support / add additional components; as well the relevant signals used in C64 and Apple II (from github information) are being routed to the prototyping area. Despite this, there are no C64 or Apple II released firmwares to test them yet, As soon a C64 / Apple II firmware is released, I will test it with a real machine
  11. There are units available, as well, there are Atari 8 bits and Coleco Adam cables for them
  12. Your unit has been sent, You have a private message with tracking number and details,
  13. Thank you so much! Final Fight port is a sad history; graphically is good for the release time, performance is not good, but playability is tremendously horrible and it ruins the game.
  14. Update from today the common problem with many power sources is solved, The problem was the usage of micro USB port for powering; now each hard disk unit comes with an attached and soldered USB cable (to 5V and GND pins). If you use 5V and GND labeled pinout, any power source can be used; but if you use the micro USB port, you will be limited to few ones.
  15. There are few Coleco Adams around the world, and some of them finished their days in this way... Sorry for that,
  16. @bf2k+ Your LC Fujinet v1.6 with Atari 8 bits cable has been sent, You have a private message with tracking number
  17. @Ade @shiro_nezumi Your units have been sent, You have a private message with tracking number and "how to" information,
  18. Thanks for reporting! Its possible to use the revision A firmware in revision B boards. Difference is the SD card speed, from 16-18 MHz to 36 MHz. That lead to faster SD card transactions and more commands per second. This bandwidth increase appears to produce non desired side effects for your machine. You will receive previous firmware files and "how to" flash them as soon as possible, Best,
  19. Greetings, As far many users found, specially European users... are there any development pointing these 8 bit computers? A Fujinet version for these computers will be great too, as a suggestion. Currently there is an hybrid solution for Amstrad, called M4 card, based in a STM32F407 and an ESP8266 https://www.spinpoint.org/2016/05/06/m4-board-retrofun-8-bit-amstrad-cpc-wifi/ But probably, the current large hardware complexity could be simplified using a single ESP32 with GPIO TTL capable buffers, Regarding ZX Spectrum, I think there is no current wifi enabled solution. Despite this subforum is decicated to Atari 8 bits, it is the Fujinet main subforum here.
  20. @SooSiaal Your unit has been sent today, You have a private message with tracking number and "how to" information,
×
×
  • Create New...