-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Store
Posts posted by ByteGeist
-
-
Saved and fully functional with a CS400K and 48k Ram Mapsoft but different revision and wiring needed than the faulty 48k on here.
Inductor replaced Ram card and resistors 3 faulty ram Ic's. LS42 & 138 replaced. Swapped 7805 & 12 for dcdc converters.
Pal Atari 400.
Model : 400 U 16k
Atari / 431
050 005961
85-16 10/16 L40 P
- 1
How about replacement power supply for Intellivision 1, 3, Tandy, and Sears
in Intellivision / Aquarius
Posted
After a broken transformer on this Inty 1591, I created a new power & Solarfox avmod pcb.
The Laptop psu and DC converter replacement route works without issue.
Replaced the 2k trimmer near rf modulator with 2.2k and replaced both trimmers on the video board.
The composite is now bright and rather excellent.
Converters set to 5v, 12v and adjustable -2.4 which under load drops to -2.12
- Converter swapped VO and Ground for neg voltage.
Minimal ripple.
19v = unregulated and feeds 12v
12v feeds 5v
5v feeds -2.1
2.1 feeds 5v needed as unregulated 5v tapped from V-In
So it's not too much of an issue if you cannot get a transformer & with the Laptop psu being driven via native mains, rather international.