Jump to content

Evidious

Members
  • Posts

    78
  • Joined

  • Last visited

Everything posted by Evidious

  1. I updated the firmware for my 1088XEL and now .ATR files do not show up on my CF Card only .XEX files do. Any help on how to fix this would be great I tried going back to the old firmware and its not working -thanks
  2. Please add me to the purchase list. One Dragonfly cartridge, all options, and burgundy colored case. Thank You.
  3. Rest in peace Curt. Condolences to his family and friends.
  4. Is it a good idea or bad idea to replace the 12v and 5v regulators with more efficient Switching regulators? I was wonder if anyone had any thought on this
  5. Any information information would be great Karl. The only Information is what I typed in from The .doc files on my US Doubler Disk -Bobby
  6. Sorry,I meant dine out only Scotty,Thanks Mr. Fish,I do have the installation manual. Just no info on the U.S. Doubler. -Bobby
  7. Hi Karl; Thanks for your help! I have the Installation Manual but not the actual operating manual for the U.S. Doubler by ICD As far as i know but i could be wrong it's different than the US Duplicator. -Bobby
  8. Since my job is closed for the next few weeks and the bars are closed and the restaurants are dine in only I have a lot of free time. I could never find the Manual for the US Doubler it's probably out there but I can't find it. So I typed in all the files from the .DOC on the disk. If any one wants to add,correct,proof read, amend, and update it and make a PDF and post it please do. I used notepad++ to type it in US Doubler Manual.txt
  9. any way i can purchase two cases for the controller?
  10. both switches up,but it fills the whole screen with A off and B on its a Seiki Monitor/TV , I will try it on a Plain PC Monitor when i get a chance
  11. The green light blinks on my board blinks.Is that ok? Other than that it looks great!
  12. https://hackaday.com/2019/10/24/retro-hardware-plots-again-thanks-to-grbl-and-esp32/?fbclid=IwAR1QohVD1G3qC_Ytg4zeGMhj46INZITnh6gEo-XQL81OMfcMB3YbdE8Hp9E
  13. i don't know if this is it. its the closest i could find Ultra-Font (19xx)(Cuz Feeshe Software Developments).atr
  14. Just a Suggestion mytek but maybe you can try a place that does trophy engraving for your front panel label?
  15. I finally got my boards put together and the work perfectly! Thanks Scott! And thanks to DrVenkman for the step by step instructions on how to program the ATtiny85!!! -Bobby
  16. Finally got these together and buttoned up, Thanks for everyones help with assembly and setting it up!!!!
  17. it is a DVI Sophia board in the machine and thank you
  18. I have three boards and I picked the bad one. Only I can do that Again I appreciate all of everybody's help..excuse me while i crawl under a rock and hide I will check the board to see where i made a mistake
  19. I have 3 XEL-CF boards and I switched it to another one...look what i got
  20. it's still hanging, I am using the firmware.rom to update the firmware. is this correct? I tried using xel.rom but it says the file is to large : expected 64k Thanks for your help MacRoie.
  21. Thanks for the patience and help flashjazzcat. the flashing procedure I understand it's picking the correct file I get wrong I did what you said in the PBI BIOS and Hard Disk menu it now hangs on this screen and will not go any further and i sent a screenshot of the setting i have in the menu
×
×
  • Create New...