jos3ang3l

Sorry for double post because i failed quoting ?‍♂️ I got it and finally.... Its Solved!!!? Finally i got it numbering the poles of the DPDT switch as: 1---4 2---5 3---6 I put the cable from the anode pad (5V) of the old green LED (left pad seeing the console from the controller inputs) to pole 2 of the switch to give 5V to LED and the right poles (red light) and left poles (green light) to poles 1 and 3 of the switch respectively. The cables that come from the resistor that I removed at point 140, went in this way: the 50hz cable to pole 5 of the switch and the 60hz cable to pole 6 of the switch. Finally i soldered the central pole of the LED to the GND pad of the old green LED (right pad seeing the console from the controller inputs) Thanks a lot for your help Stephen Moss ?

Thank you very much for your answer ? To access the second guide you must click on the coding corner (icon on the top right) and on the next screen on BJL FAQ by Stone (in this guide it is point 11) So, numbering the poles of the DPDT switch as: 1---4 2---5 3---6 I should put the cable from the central pole of the LED to pole 2 of the switch and the right poles (red light) and left poles (green light) to poles 1 and 3 of the switch respectively? The cables that come from the resistor that I removed at point 140, would go in this way: the 60hz cable to pole 5 of the switch and the 50hz cable to pole 6 of the switch? When I get home this afternoon, I'll try again with your instructions. ?

Hello everyone! I have made the 50/60 hz mod my Atari Jaguar and it works perfectly without the led mod, but I have a serious problem when making the led mod: I can't get the tricolor led to work, if I use a SPDT switch and cross the wires as you explain in the tutorial: https://circuit-board.de/forum/index.php/Thread/7016-Atari-Jaguar-Reparatur-50-60Hz-Mod-RGB-Buchse-Signal-LED/?postID=148453#a -33ba12cda3 only turns on the red led in the 60hz position and it works at 50hz, if I change to the 50hz position it works at 50hz and does not turn on any light. If I make the led mod as explained in point 11 of this guide: https://web.archive.org/web/20060103155538/http://www.atari-jaguar64.de/english/start.html with a DPDT switch, the 50/60hz mod works but does not turn on any light... Could you help me? I do not know what I'm doing wrong... Thanks in advance for your help!