mszlaga

Greetings, h I recently dug out my old ColecoVision from the attic. Much to my chagrin I found that the system was in need of much TLC and cleaning. I have been able to find a working replacement for a broken power switch and cleaned out all the connectors. The ColecoVision works like a champ, but the expansion module #1 did not fare so well. I got it work but only intermittently. Upon further inspection it turns out that one of the pins in the connector is damaged. Does anyone know of a replacement edge connector for the expansion module? I have looked at Digikey, but after a while of searching I did not see anything that fits. Thanks, Mark

Donkey Kong 2600 works fine with my CV 2600 module. I've had it for years. He probably has a bum one or the contacts are dirty. The expansion #1 is a finiky beast. Mark 1009267[/snapback] Are you using the white donkey kong 2600 cart or the black one with a red label ? 1009354[/snapback] I own two of the white donkey kong 2600. Both work like a champ, once you clean the contacts.

Donkey Kong 2600 works fine with my CV 2600 module. I've had it for years. He probably has a bum one or the contacts are dirty. The expansion #1 is a finiky beast. Mark