Search the Community
Showing results for tags 'cv paddle controller'.
Found 3 results
Canceled due to lack of interest. CV Paddle controller – Colecovision Paddle Controller Welcome to the auction. You will be bidding on the prototype Colecovision handheld paddle controller. This is the only one in existing. No other prototypes of this controller will be produced. This it prototype #1. This controller has been tested on both the original CV and the Phoenix. Additionally, this controller can work with Atari 2600 Joystick games. The FAQ referenced below shows a video of A2600 Kickman played with the paddle. It’s designed for games that are either horizontally or vertically oriented. I created this controller specifically for the CV version of Kaboom but works for other games. This controller requires one 9-volt battery to function. There are dip switches on the back to change the orientation, and also can reverse the direction; left becomes right, or up becomes down. This controller does not alter the game and can’t make an object on the screen move any faster than it would with a normal controller. This is controlled by the software itself. This controller was shown at PRGE the weekend of 10/18/2019. Those who tried it were very excited by it. The FAQ listed below has some links to videos showing it being used. The controller has been verified to be working at the time of this auction. Please take time to read this FAQ before bidding: This is a prototype; it could break, it could break your machine, etc. I don’t expect that it will, but I take no responsibility for damage to you, your machine, etc, etc… NEVER turn the paddle on or off with the system turned on. This is a good practice with any controller. There may be additional paddle controllers produced, but they will start with #001. They may also have a few modifications. They will not have prototype printed on them, etc. The winner of the auction will win the CV Paddle Controller and 1 y-adapter. See pictures below. Shipping and insurance will be additional. International buyers welcome, though you will need to work with me figuring out how to ship. I Haven’t done much international shipping. Bidding starts at $200. I will try to update the OP with the current high bid once a day. Bidding will continue till November 3rd, 2019 between 3 – 5 PM California time. I reserve the right to update this text if I realize that I have made a mistake. Thank you and happy bidding.
Hey everyone, So I have finally completed the instructions for building your own ColecoVision and/or Intellivision Paddle Controllers. Please use this thread to submit any questions or thoughts. I hope you find this useful, and I hope you have fun. You can find the software and Instructions here: https://github.com/evg2000/ATTiny84_Version3.1 The STLs for the paddle case are here: https://www.thingiverse.com/thing:4316115
Auction is up: