Search the Community
Showing results for tags 'rom dump'.
Found 3 results
Hi all! Last month I saw the following ad on eBay: I thought the appeal of this kit for homebrew development was very limited: No bankswitching/mapper (only 2K games or 4K games with further modifications on the board) It required messing around with UV lamps, programmers, etc Required some knowledge of electronics Buying the parts separately would probably be less expensive Not possible to ship as a product to customers It would be probably easier and faster to use one of the existing USB/SD carts to test on a real hardware. This did make me think though that I had never seen a development kit for the 2600 which would allow homebrewers without knowledge of electronics to self publish their games. If a mapper is required, then that knowledge need goes up real fast. As in Europe we have very limited offers of good homebrew games available (most of them are from the USA and shipping quickly becomes a problem), I thought about making this my next project. The idea is to have blank carts (populated with all required components but without any game image in them) and a simple to use cable and PC software which would allow the user to create a cart ready to be shipped to customers as well as test games in a real atari. Is this something that would interest the homebrew community? Here are some requirements I have come up with: The final product must cost under 10€ (populated cart PCB) All components must be easy to find. Preference should be given to components still in production Must be usable by people with no experience in electronics No soldering Must support mappers (the ones used by batari Basic at a minimum, as a lot of people seem to use bB) No physical alterations to select the desired mapper (or no mapper) Must fit in a standard Atari cartridge case Components should be SMD to keep production cost as low as possible All comments will be appreciated!! Cheers.
With this handy tool from Frankenstein, made in 1992, you can create your own OS and BASIC ROM dumps. Boot the ATR, start ROMSAVER.COM, insert an empty disk and press start. The tool writes OS.ROM (16K) and BASIC.ROM (8K). Good luck!
Hi all, I have created the following post yesterday: Someone just told me that I should have created it in this subforum. I don't want to duplicate the post but I have also not found how to move the post here. Any suggestions? Also, if you can comment on the bankswitch schemes you currently use in your programs and any experience you can share on how to implement a bankswitch controller on a 8bit Microchip PIC will be much appreciated. Cheers!