AtariMan1976 Posted July 28, 2007 Author Share Posted July 28, 2007 Your power supply has been modified. The original has a big transistor to the left of that large white cap and yours just has a red wire going there. Your video wires have been cut. maybe. I know the wires that come down offthe back off the coin box went to that but everything got pulled and ripped out when the bottom of this cab fell off a little over a year ago, but i have since repaired the bottom. As for the video, i guess i could put another plug back on the end or just find a way to get the wires to the rightr pens on the game board. Do you have a pic of an original power supply? Quote Link to comment Share on other sites More sharing options...
djpubba Posted July 29, 2007 Share Posted July 29, 2007 Do you have a pic of an original power supply? Yes, but not installed (also filthy). Quote Link to comment Share on other sites More sharing options...
AtariMan1976 Posted July 29, 2007 Author Share Posted July 29, 2007 Do you have a pic of an original power supply? Yes, but not installed (also filthy). Hmm, I'm assuming i'll need thatpart then. Is it easy to find and where do i get one? Quote Link to comment Share on other sites More sharing options...
AtariMan1976 Posted August 1, 2007 Author Share Posted August 1, 2007 Your power supply has been modified. The original has a big transistor to the left of that large white cap and yours just has a red wire going there. Your video wires have been cut. maybe. I know the wires that come down offthe back off the coin box went to that but everything got pulled and ripped out when the bottom of this cab fell off a little over a year ago, but i have since repaired the bottom. As for the video, i guess i could put another plug back on the end or just find a way to get the wires to the rightr pens on the game board. Do you have a pic of an original power supply? Update: Its actually not a transistor but a bridge rectifier thats supposed to be there. Yours has both original. Ihave the one like yours but my other one has actually been modded to mount on the rear of the coin box using it as a huge heat sink. The wires run down from that to the board acting as the original would. So essentially, it's still a working zookeeper power board. I will have to resolder some wires. The video i know was modded to wire direct to jamma connections. Will i be able to still use that cable?? Quote Link to comment Share on other sites More sharing options...
Cassidy Nolen Posted August 2, 2007 Share Posted August 2, 2007 http://arcadeshop.com/pics/taito-ps.jpg This is an integrated modern power supply with the connections to work on your classic harness. Worth the money to make it reliable if you don't already have the original. Most of the Taitos died because of bad contacts, the batteries and the power supplies got overheated. I have seen MANY with burned terminals, those and Midway and Williams ones. Atari ones tended to fair better (of course they ate edge connectors). HTH. Keep rocking man, you'll get that game some day. It will mean more to you than ANY other in your collection AND you'll STILL have less in it than buying one outright! Cassidy Quote Link to comment Share on other sites More sharing options...
AtariMan1976 Posted August 3, 2007 Author Share Posted August 3, 2007 http://arcadeshop.com/pics/taito-ps.jpg This is an integrated modern power supply with the connections to work on your classic harness. Worth the money to make it reliable if you don't already have the original. Most of the Taitos died because of bad contacts, the batteries and the power supplies got overheated. I have seen MANY with burned terminals, those and Midway and Williams ones. Atari ones tended to fair better (of course they ate edge connectors). HTH. Keep rocking man, you'll get that game some day. It will mean more to you than ANY other in your collection AND you'll STILL have less in it than buying one outright! Cassidy Thanks for that one. may have to go with that if the original takes a dump. Quote Link to comment Share on other sites More sharing options...
AtariMan1976 Posted August 8, 2007 Author Share Posted August 8, 2007 Update: Well, Yall saw what it looked like before, heres what it looks like so far as of today. Finally got my bezel glass and my control panel thanks to QuarterArcade.com. I'll eventuallyget this done. At least i can't tell it was converted into a golf game anymore. Quote Link to comment Share on other sites More sharing options...
Cassidy Nolen Posted August 10, 2007 Share Posted August 10, 2007 LOOKIN GOOD man! I used to use an exacto blade knife strapped to a pencil with packaging tape as a guide then cut a straight line where the control panel overlay "bends" and chips off. That way I could make a clean cut on the bottom edge and touch it up with black enamel paint. I had a Galaga that looked factory fit that way (of course if you knew the game had a one piece overlay then it didn't but it was clean and true). Glass looks great. Seems its really coming along nicely! Way to go! The pics are great. C Quote Link to comment Share on other sites More sharing options...
Shawn Posted August 10, 2007 Share Posted August 10, 2007 Update: Well, Yall saw what it looked like before, heres what it looks like so far as of today. Finally got my bezel glass and my control panel thanks to QuarterArcade.com. I'll eventuallyget this done. At least i can't tell it was converted into a golf game anymore. VERY nice work!!! You took a hunk of shit and made it beautiful agian! You can tell from the quality and time you put in your enjoying this project and it looks great. Quote Link to comment Share on other sites More sharing options...
AtariMan1976 Posted August 10, 2007 Author Share Posted August 10, 2007 LOOKIN GOOD man! I used to use an exacto blade knife strapped to a pencil with packaging tape as a guide then cut a straight line where the control panel overlay "bends" and chips off. That way I could make a clean cut on the bottom edge and touch it up with black enamel paint. I had a Galaga that looked factory fit that way (of course if you knew the game had a one piece overlay then it didn't but it was clean and true). Glass looks great. Seems its really coming along nicely! Way to go! The pics are great. C Update: Well, Yall saw what it looked like before, heres what it looks like so far as of today. Finally got my bezel glass and my control panel thanks to QuarterArcade.com. I'll eventuallyget this done. At least i can't tell it was converted into a golf game anymore. VERY nice work!!! You took a hunk of shit and made it beautiful agian! You can tell from the quality and time you put in your enjoying this project and it looks great. Thanks guys. I'm trying. Looks like i might have to wait a couple of months on the boards but i'll post here when there's an update. Quote Link to comment Share on other sites More sharing options...
+Psionic Posted August 13, 2007 Share Posted August 13, 2007 This guy was working on one too...I don't know if he ever finished it: http://www.krakboi.com/arcades/zookeeperrestoration.htm Quote Link to comment Share on other sites More sharing options...
Ice Cream Jonsey Posted August 13, 2007 Share Posted August 13, 2007 That thing is looking gorgeous, great job. As someone who knows nothing about Zookeeper (and Taito cabs in general) what is the benefit of bypassing the coin processor? Is it just to allow free play? (And I take it the coin processor is different than the coin mech on the cab's front door?) Quote Link to comment Share on other sites More sharing options...
djpubba Posted August 13, 2007 Share Posted August 13, 2007 The coin processor is a copy protection device used to prevent you from putting Zoo Keeper ROMs on a Qix board or one of the other games with identical hardware. Without the coin processor board specific to your game, the game won't play (basically it scrambles the inputs from the control panel and coin door in a different way for each game). The coin processor going bad is a very common problem, so the benefit of bypassing it is you don't need to find a working one when yours goes bad. You can just burn a new patched ROM for your game and disconnect the coin processor. Quote Link to comment Share on other sites More sharing options...
Alpha1 Posted August 18, 2007 Share Posted August 18, 2007 ArcadeShop.com sell power supply kits for Taito games like this that have the reset/delay needed. Oliver Quote Link to comment Share on other sites More sharing options...
exidy Posted August 26, 2007 Share Posted August 26, 2007 looks nice, you did a good job. here is a picture of my zookeeper. Zookeeper direct link ex/arcade-classics.com Quote Link to comment Share on other sites More sharing options...
Arcadenut Posted August 29, 2007 Share Posted August 29, 2007 (edited) Must be the year of the Zoo Keeper Restorations! Amazing stuff you guys have done so far. I am finishing up my restoration as well! Here is mine: http://www.arcaderestoration.com/index.asp...A=509&CBT=6 Not much for pictures up yet, but I'll be adding them soon. The sides are a bit scuffed up in a few places, but I plan on leaving it as is. If anyone can help, I do need some pictures. I am looking for detailed pictures of the inside. Following the Wiring Harness from the coin door to the back door, and from the back door up to the speaker/light fixture. I've looked at all the pictures so far and they do give me a lot of info, but I am looking for placement information and which connectors go where. Thanks! Edited August 29, 2007 by Arcadenut Quote Link to comment Share on other sites More sharing options...
Arcadenut Posted August 29, 2007 Share Posted August 29, 2007 http://www.arcaderestoration.com/index.asp...A=509&CBT=6 Not much for pictures up yet, but I'll be adding them soon. Ok, I added a lot more pictures. A lot more to come in the next few days as the assembly is completed. Quote Link to comment Share on other sites More sharing options...
djpubba Posted August 30, 2007 Share Posted August 30, 2007 I like restoring them just as much as playing them. I'm on a crazy deadline for 16 different things, but I can take s'more pics of mine when it's over if nobody beats me to it. Quote Link to comment Share on other sites More sharing options...
Arcadenut Posted September 1, 2007 Share Posted September 1, 2007 I like restoring them just as much as playing them. I'm on a crazy deadline for 16 different things, but I can take s'more pics of mine when it's over if nobody beats me to it. Cool! The thing that concerns me right now is I am using a QIX harness and I think I might have to make an additional part for the ROM board, but I'm not sure. I have two connectors left labeled P3 and P4, however, I think those should be going to the Power Supply and not the ROM board. I think I'll need to build some custom Ribbon Cables too, which hopefully won't be too bad. Quote Link to comment Share on other sites More sharing options...
djpubba Posted September 6, 2007 Share Posted September 6, 2007 Here's a closer pic of the ROM board area. I need better lighting for the other pics. Quote Link to comment Share on other sites More sharing options...
Arcadenut Posted September 6, 2007 Share Posted September 6, 2007 Here's a closer pic of the ROM board area. I need better lighting for the other pics. Thanks that helps a lot. Can you show me a pic of the Inside of the cab where the harness goes to the Power Supply? Thanks! Quote Link to comment Share on other sites More sharing options...
djpubba Posted September 7, 2007 Share Posted September 7, 2007 Yes, but it won't do you any good because I've replaced mine with a PC-AT power supply. That picture in post #27 above is of the old dead one I pulled out. Quote Link to comment Share on other sites More sharing options...
Arcadenut Posted September 9, 2007 Share Posted September 9, 2007 Yes, but it won't do you any good because I've replaced mine with a PC-AT power supply. That picture in post #27 above is of the old dead one I pulled out. ok, let me ask you this then Did you modify the harness or did you build an adapter? What are the connectors labeled that connect to the power supply? Thanks for all your help so far! Quote Link to comment Share on other sites More sharing options...
djpubba Posted September 10, 2007 Share Posted September 10, 2007 I built an adapter. They are called P3 and P4. Both of the connectors on the power supply have the same pinout so it doesn't matter which you plug where. Pic of my adapter, made out of a Taito filter board, attached for shits and giggles. Quote Link to comment Share on other sites More sharing options...
Arcadenut Posted September 14, 2007 Share Posted September 14, 2007 I built an adapter. They are called P3 and P4. Both of the connectors on the power supply have the same pinout so it doesn't matter which you plug where. Pic of my adapter, made out of a Taito filter board, attached for shits and giggles. Thanks, that's what I needed. For some reason, I'm not getting notified of replys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.