nashnooga Posted July 27, 2002 Share Posted July 27, 2002 does anyone have pictures or know of a website where it has DETAILED instructions to put a new 72 pin connector in an nes? Has anyone done it? Is it hard? Quote Link to comment Share on other sites More sharing options...
Rockin' Kat Posted July 27, 2002 Share Posted July 27, 2002 Check out this place: http://www.gooddealgames.com/articles/NES_Repair.htm Quote Link to comment Share on other sites More sharing options...
+Allan Posted July 27, 2002 Share Posted July 27, 2002 I just did it a couple of weeks ago. It's not that hard. Just keep the screws organized and pay attention when taking everything apart. Take a moment to study it. You'll see how it goes together. You really can't put it in wrong. If you accentently put it in upside down you'll realize it right away as you try to put things back together. It can be a little difficult pushing the pin connector on to the board (It's a tight fit). Just make sure you have a good hold of the board and the connector. It took me five minutes. The longest part is unscrewing all the screws. Allan Quote Link to comment Share on other sites More sharing options...
IceCold Posted July 27, 2002 Share Posted July 27, 2002 Allan is right, it's a breeze, just try not to lose any screws. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.