Longhorn Engineer Posted December 29, 2007 Share Posted December 29, 2007 Hello! I need some Atari consoles so I can further work on my video mods. Hopefully I can get them without to much cost. I will need 1 of the following with hookups. No controllers are necessary though. 2600 Heavy Sixer 2600 4 Switch 2600 Junior 5200 2 port 7800 Ideally I would like them to be in decent shape (no cracked shells) but they must be working! Dirty consoles are fine. Thanks! Quote Link to comment Share on other sites More sharing options...
phil_vr Posted December 29, 2007 Share Posted December 29, 2007 You might as well give a PM to AtariAge member igg1na.. I am pretty sure he can help you out.. Quote Link to comment Share on other sites More sharing options...
A.J. Franzman Posted December 30, 2007 Share Posted December 30, 2007 (edited) Well, let's see... I have a working 2600 Jr. with a neatly repaired crack in the case (solidly glued from the inside w/ ABS plumbing cement; the crack is mostly under the aluminum strip and hard to see from the outside) and two hardly noticeable chips missing from corners. Also, a working 2600 bare 4-switch board, and a broken bare 6-switch boardset w/ shielding that I haven't bothered to fix because I don't have a case to put it in. I could fix it for you if you want it. If you're developing circuit mods you don't really need the cases anyway, right? I can provide RF cables, switchboxes and AC adapters if you want them. Edited December 30, 2007 by A.J. Franzman Quote Link to comment Share on other sites More sharing options...
Longhorn Engineer Posted January 2, 2008 Author Share Posted January 2, 2008 Some deals pending. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.