+DuaneAL Posted November 2, 2019 Share Posted November 2, 2019 Looks like I'll have to invest in a SAMS card?... and a PEB. Too bad for me there's not a SAMS version of the nanoPEB. Really amazing looking! 2 Quote Link to comment Share on other sites More sharing options...
+adamantyr Posted November 2, 2019 Author Share Posted November 2, 2019 12 hours ago, wierd_w said: I have a large format printer just chillin in one of my work rooms, do you want any large maps printed? I can order some shiny paper. Well thank you for the offer! I'll let you know. My plan was to get the map printed at Office Depot ($1.18 a copy) and then trim it down from 11x17. It still has to fit inside the 6x9 box with two folds. Quote Link to comment Share on other sites More sharing options...
wierd_w Posted November 2, 2019 Share Posted November 2, 2019 (edited) 1 hour ago, adamantyr said: Well thank you for the offer! I'll let you know. My plan was to get the map printed at Office Depot ($1.18 a copy) and then trim it down from 11x17. It still has to fit inside the 6x9 box with two folds. Meh! over a buck a pop For 11x17!? I would just grab a 22" roll of paper, and print two at the same time. My printer handles up to 36" wide roll. (Or I could order a box of shiny 11x17, and use the sheet feeder, but that would take forever.) Office Depot's online store currently has 24" coated paper roll on sale for around 50$. https://www.officedepot.com/a/products/816844/HP-Coated-Paper-Roll-24-x/;jsessionid=0000ExpxUEAwWkjeYxV1SwN4Q31:17h4h7ado I would need to know how many you need to know if I can undercut that 1$ figure. (If I ran out the whole roll, printing 2 at a time and using a paper slicer to cut them apart... I would get 210 prints, assuming no misprints. That comes out to about 25 cents per map, paper cost wise. Ink is actually pretty inexpensive for this printer, shockingly. Its about 50$ per tank, and each tank holds about a liter of ink. I have brand new tanks installed.) I have some cheap bond paper loaded right now. I am gonna run your small image through waifux2-caffe and scale it up to meet the printer's native resolution and do a test print. See how it looks. Edited November 2, 2019 by wierd_w 1 Quote Link to comment Share on other sites More sharing options...
+Vorticon Posted November 4, 2019 Share Posted November 4, 2019 On 11/2/2019 at 1:41 AM, DuaneAL said: Looks like I'll have to invest in a SAMS card?... and a PEB. Too bad for me there's not a SAMS version of the nanoPEB. Really amazing looking! The 99/5c computer demonstrated at the Chicago Faire this past weekend has an integrated SAMS, 80-cols support via the 9938 VDP with VGA output, SD-based storage and USB mouse, joysticks and keyboard while being 100% compatible with the 99/4A. It's selling at $479.95 (add $30 for a powered case if you need one). Here's the site: https://caddelectronics.com/product/ti-99-5c-bare-metal/ In your situation, purchasing a PEB and SAMS, plus shipping, would get you pretty close to that price point. Something to think about. 1 Quote Link to comment Share on other sites More sharing options...
Opry99er Posted November 4, 2019 Share Posted November 4, 2019 -SAMS acquired.... -TIPI acquired..... Now bring on the pain....... 1 1 Quote Link to comment Share on other sites More sharing options...
+DuaneAL Posted November 4, 2019 Share Posted November 4, 2019 3 hours ago, Vorticon said: The 99/5c computer demonstrated at the Chicago Faire this past weekend has an integrated SAMS, 80-cols support via the 9938 VDP with VGA output, SD-based storage and USB mouse, joysticks and keyboard while being 100% compatible with the 99/4A. It's selling at $479.95 (add $30 for a powered case if you need one). Here's the site: https://caddelectronics.com/product/ti-99-5c-bare-metal/ In your situation, purchasing a PEB and SAMS, plus shipping, would get you pretty close to that price point. Something to think about. That looks amazing- I really need to make it to the event sometime. Thanks for the info! I was hoping Fabrice would have his Ti (ny) done, then there is this or stay totally retro-original with the PEB- so many options! Quote Link to comment Share on other sites More sharing options...
+adamantyr Posted November 10, 2019 Author Share Posted November 10, 2019 I have sent out the announcement and links to the beta testing team! 7 Quote Link to comment Share on other sites More sharing options...
broettger Posted November 11, 2019 Share Posted November 11, 2019 6 hours ago, adamantyr said: I have sent out the announcement and links to the beta testing team! Awesome news. I can’t wait for the full release! Quote Link to comment Share on other sites More sharing options...
+adamantyr Posted November 11, 2019 Author Share Posted November 11, 2019 5 minutes ago, broettger said: Awesome news. I can’t wait for the full release! Hopefully not too far off... Under normal circumstances with another game, I would just release it and let feedback come in to fix bugs and stuff. But I feel like I need to have a higher quality here, since a CRPG takes a considerable amount of time to complete. I don't want six months from now someone saying "Oh BTW, you can't actually finish it because of this". I've played through the early content on my own a lot, but fresh eyes definitely helps as well to catch particulars I may have missed because I'm too close to things. Much like with Wizard's Doom, I'm going to probably end up tweaking monster statistics and general play difficulty a LOT. I want the game to be accessible but not too easy. 1 Quote Link to comment Share on other sites More sharing options...
Opry99er Posted November 11, 2019 Share Posted November 11, 2019 Exciting times. my quest begins tonight at 23:00. 2 Quote Link to comment Share on other sites More sharing options...
+adamantyr Posted December 4, 2019 Author Share Posted December 4, 2019 Just a quick update... Beta testing is going well, we are up to build #13. IF you are interested in testing, please drop me a PM. Bear in mind testing means actually dealing with having to start the game over a lot, encountering bugs and trying to repro them, having some free time to devote to it, etc. I believe that I will be able to also offer the game as executable with a 180K drive system as well. It would be six disks, and you'd have to swap the load disk for a game disk right after the title screen. And I'd still strongly advise anyone to just get a TI-PI because it's WAY more convenient. 1 Quote Link to comment Share on other sites More sharing options...
wierd_w Posted December 4, 2019 Share Posted December 4, 2019 I wish I had a SAMS; I would accept that offer. I often get more enjoyment out of breaking games than I do playing them. Sadly, part of doing this properly means "real hardware preferred", since you want to fix problems with your software, not experience "unintended FUN" from emulation not being 100%. Quote Link to comment Share on other sites More sharing options...
+adamantyr Posted December 4, 2019 Author Share Posted December 4, 2019 6 minutes ago, wierd_w said: I wish I had a SAMS; I would accept that offer. I often get more enjoyment out of breaking games than I do playing them. Sadly, part of doing this properly means "real hardware preferred", since you want to fix problems with your software, not experience "unintended FUN" from emulation not being 100%. Actually I prefer emulation for beta testing. I've had guys step through the debugger for me when I wasn't able to repro the issue myself. Classic99 is also 99.99% solid in terms of replicating the original hardware. We even discovered a small bug in Classic99 with the key scan routine in the process of testing. Quote Link to comment Share on other sites More sharing options...
wierd_w Posted December 4, 2019 Share Posted December 4, 2019 (edited) I might just take you up on it then. Does classic99 do savestates? It would be useful (rather than saving and loading the game over and over again) when validating all possible interactions, etc. Also, I DID print a sample of that map after Waifu2x-ing it. It turned out pretty nice, all in all, other than the strangeness waifu did to it. Want pictures? Edited December 4, 2019 by wierd_w Quote Link to comment Share on other sites More sharing options...
+adamantyr Posted December 4, 2019 Author Share Posted December 4, 2019 2 minutes ago, wierd_w said: I might just take you up on it then. Does classic99 do savestates? It would be useful (rather than saving and loading the game over and over again) when validating all possible interactions, etc. It doesn't have save states, no. Just PM me an email contact address and your full name for the credits! Also, we use a Discord server, which you are free to join and chat with other testers, report issues in real time, etc. Or you can just stick with e-mailing reports, whichever works best. Quote Link to comment Share on other sites More sharing options...
wierd_w Posted December 4, 2019 Share Posted December 4, 2019 (edited) Ok. Not tonight though. Work. Tomorrow is good though. My good phone is currently too drained to take pics but heres a crappy one from the "work phone" (it takes awful pictures. My good phone is a galaxy S5, and takes nice ones) of a print i did of your map. Its just bond paper but still. Edited December 4, 2019 by wierd_w 3 Quote Link to comment Share on other sites More sharing options...
+FarmerPotato Posted December 4, 2019 Share Posted December 4, 2019 54 minutes ago, wierd_w said: My good phone is currently too drained to take pics but heres a crappy one from the "work phone" (it takes awful pictures. My good phone is a galaxy S5, and takes nice ones) of a print i did of your map. Its just bond paper but stil Wow, that map looks great printed out. Quote Link to comment Share on other sites More sharing options...
+mizapf Posted December 4, 2019 Share Posted December 4, 2019 MAME supports save states for the TI-99 family. Quote Link to comment Share on other sites More sharing options...
+adamantyr Posted December 4, 2019 Author Share Posted December 4, 2019 4 minutes ago, mizapf said: MAME supports save states for the TI-99 family. Yeah, at some point I need to get the program onto disk images and test it out in MAME. On that note, MAME does run on Mac, right? I had one co-worker who was interested in trying the beta, but he's a Mac guy. Quote Link to comment Share on other sites More sharing options...
Tursi Posted December 4, 2019 Share Posted December 4, 2019 9 minutes ago, mizapf said: MAME supports save states for the TI-99 family. Everytime someone mentions MAME I'm going to start posting "Classic99 supports..." 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted December 4, 2019 Share Posted December 4, 2019 17 minutes ago, Tursi said: Everytime someone mentions MAME I'm going to start posting "Classic99 supports..." I've seen and heard of MAME, tried to use it once but felt mentally maimed afterwards, and since Classic99 does everything I want, it's where I stay. Quote Link to comment Share on other sites More sharing options...
+mizapf Posted December 5, 2019 Share Posted December 5, 2019 2 hours ago, Tursi said: Everytime someone mentions MAME I'm going to start posting "Classic99 supports..."  Well, why not, if someone looks for a feature that Classic99 supports and MAME does not? 1 Quote Link to comment Share on other sites More sharing options...
+9640News Posted December 5, 2019 Share Posted December 5, 2019 3 hours ago, Tursi said: Everytime someone mentions MAME I'm going to start posting "Classic99 supports..." MAME = Geneve 9640 Classic 99 = ???? Quote Link to comment Share on other sites More sharing options...
wierd_w Posted December 5, 2019 Share Posted December 5, 2019 5 hours ago, FarmerPotato said: Wow, that map looks great printed out. You should see it with a camera that doesnt suck. Got my 5S charged so heres what i WANTED to show yesterday. Quote Link to comment Share on other sites More sharing options...
Tursi Posted December 5, 2019 Share Posted December 5, 2019 3 hours ago, BeeryMiller said: MAME = Geneve 9640 Classic 99 = ???? You've never heard of the TI-99/4A? Beery, I thought you'd been around a while!! Guys, don't turn every time I tease Mizapf into a Classic99 vs MAME debate, please. 1 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.