Jinks Posted February 18, 2016 Share Posted February 18, 2016 How do I bridge a cut trace?You can always solder a jumper wire if all else fails. Quote Link to comment Share on other sites More sharing options...
Ikrananka Posted March 3, 2016 Share Posted March 3, 2016 Was it decided that this will not work on the Colecovision Atari expansion? I too would like to know the answer to this. Quote Link to comment Share on other sites More sharing options...
CPUWIZ Posted March 3, 2016 Share Posted March 3, 2016 I too would like to know the answer to this. Don't have one, do not know. Quote Link to comment Share on other sites More sharing options...
alex_79 Posted March 5, 2016 Share Posted March 5, 2016 Was it decided that this will not work on the Colecovision Atari expansion?I too would like to know the answer to this. I think it should work in the same way it works on a standard 2600, but you have to trace the board to find out which pin on the coleco TIA IC clone carry the RDY signal needed for the pause board, as the pinout is different from the Atari original TIA and it's not documented AFAIK. There are different revisions of the expansion module (and coleco gemini as well): - The 3 chip versions uses stock 6507 CPU and 6532 RIOT plus the coleco TIA. You should be able to find out the needed pin by following the trace from pin 3 of the 6507. - The 2 chip versions uses a custom 40 pin IC which combines the cpu and RIOT into a single package, and the same coleco TIA clone as the 3 chip version. Here also the combined CPU-RIOT pinout is unknown, so it would be better to trace a 3-chip board first, and once found the pin on the Coleco TIA find out where it connects to the combo CPU-RIOT chip. Just like the Atari versions, PAL consoles have a different TIA chip, and the pinout could also be different from the NTSC one. Here are pictures that I found online showing some of the different boards: expansion module 1: NTSC 3 chips NTSC 2 chips PAL 3 chips gemini NTSC 3 chips PAL 2 chips 1 Quote Link to comment Share on other sites More sharing options...
IsARealBoy88 Posted August 30, 2016 Share Posted August 30, 2016 Why am I just hearing about this stuff now?! Quote Link to comment Share on other sites More sharing options...
CPUWIZ Posted August 30, 2016 Share Posted August 30, 2016 Why am I just hearing about this stuff now?! Because you joined a couple months ago? 1 Quote Link to comment Share on other sites More sharing options...
IsARealBoy88 Posted August 30, 2016 Share Posted August 30, 2016 Yea, I was just more or less displaying my excitement. Quote Link to comment Share on other sites More sharing options...
CPUWIZ Posted August 30, 2016 Share Posted August 30, 2016 Yea, I was just more or less displaying my excitement. I see. Are you going to make one? Quote Link to comment Share on other sites More sharing options...
IsARealBoy88 Posted August 30, 2016 Share Posted August 30, 2016 I'm slowly gathering up an idea list for mods to do to my small 2600 and I'm pretty sure this one is definitly going to make it in! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.