Jump to content
AmigaDepot

Atari Lynx II: MOSFET Q7: M6 or L6

Recommended Posts

Dear all,

 

It is nice to be part of your forum now! :)

 

I have a broken lynx II. MOSFET Q7 was fried (see the picture attached).

 

My question: Is Q7 an M6 as Q8 is or is it an L6 as the rest of the board has?

post-30086-0-65641700-1308931746_thumb.jpg

Share this post


Link to post
Share on other sites

Yes but, sorry, other than taking it apart for dusting off the lense, it appears (thankfully!) few people have had the need for electronic repairs.

Doesn´t AtariAge have the circuit boards for the Lynxes posted at its Lynx section? Not in the forum but on the AA website that lists all Lynx stuff?

Edited by Atari_afternoon

Share this post


Link to post
Share on other sites

Yes but, sorry, other than taking it apart for dusting off the lense, it appears (thankfully!) few people have had the need for electronic repairs.

Doesn´t AtariAge have the circuit boards for the Lynxes posted at its Lynx section? Not in the forum but on the AA website that lists all Lynx stuff?

 

I have had a look in that section, but it seems, there is no picture of the main board. If someone had a broken Lynx II with a non-fried Q7 and could have a look, that would be very helpful.

Share this post


Link to post
Share on other sites

Yes but, sorry, other than taking it apart for dusting off the lense, it appears (thankfully!) few people have had the need for electronic repairs.

Doesn´t AtariAge have the circuit boards for the Lynxes posted at its Lynx section? Not in the forum but on the AA website that lists all Lynx stuff?

 

I have had a look in that section, but it seems, there is no picture of the main board. If someone had a broken Lynx II with a non-fried Q7 and could have a look, that would be very helpful.

 

If the schematics from the first lynx and the lynx II are similar, Q7 is a standard NPN transistor 2N3904.

 

Hope this helps.

Share this post


Link to post
Share on other sites

Yes but, sorry, other than taking it apart for dusting off the lense, it appears (thankfully!) few people have had the need for electronic repairs.

Doesn´t AtariAge have the circuit boards for the Lynxes posted at its Lynx section? Not in the forum but on the AA website that lists all Lynx stuff?

 

I have had a look in that section, but it seems, there is no picture of the main board. If someone had a broken Lynx II with a non-fried Q7 and could have a look, that would be very helpful.

 

If the schematics from the first lynx and the lynx II are similar, Q7 is a standard NPN transistor 2N3904.

 

After looking at your picture, I would say that Q8 is damaged, which is also a standard NPN transistor 2N3904 according to the schematics for the Lynx I.

 

Hope this helps.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...